Best ceramic tile pros near Lakewood, CA

You can technically install tile over tile, but we don’t suggest it. Installing tile over any surface that isn’t a completely flat and prepared subfloor will result in a shoddy overall job, uneven flooring, tiles that don’t adhere, extra weight, gaps, cracks, and room for moisture and dirt to enter. For the best results, only install new tile on a flat, sanded surface like subflooring or concrete that is prepared for tile.

If you have asbestos tile and would rather tile over it than remove it, or if your existing tile is completely flat and bonded tightly to the floor, you may be able to tile over existing tile. But experts recommend thinking twice before you do.

Glass tiles are among the most difficult to install. This is because their transparency makes the adhesive visible, and any imperfections on the opposite side are also likely to be visible. Glass tiles also must be handled carefully during installation, as they are prone to scratching. For these reasons, glass tiles often require professional installation to get the most out of their beauty and unique look.

For professional labor and materials, it would cost between $6,000 and $28,000 to install 1,000 square feet of Saltillo tile flooring. If that’s out of your budget, you could consider laying the tiles yourself or choosing a less expensive type of flooring. For example, vinyl flooring costs just $2 to $7 per square foot, so for a 1,000-square-foot space, you’d pay $2,000 to $7,000.

You cannot tile directly over hot mop waterproofing because tile requires a smooth, solid surface to adhere properly. Additionally, the shower bed pan needs to be raised and sloped toward the drain to prevent water from pooling. However, you can hot mop and apply a sloped mortar bed over the top (to which the tile can then be adhered).