Get matched with top deck maintenance specialists in Gerber, CA

Q: Do I need to sand an old deck before staining?

• <div><p>In most cases, sanding an old deck before staining it is necessary to achieve a decent finish. If your old deck has a relatively new stain finish on it and you're only doing touch-ups, you can generally skip the sanding part. However, if your goal is to make the deck look and function better, sanding first is a must. </p></div>

Q: Does the underside of a deck need to breathe?

• <div><p>Any wood deck provides some ventilation to the area below, as is the nature of that type of <a href="https://www.angi.com/articles/how-often-should-i-inspect-my-deck.htm">deck design</a>. However, areas that experience excessive humidity and associated moisture benefit greatly from a dedicated ventilation system in the form of strip vents. This addition helps the various wood boards contract and expand evenly throughout the years and reduces the chances of twisting, warping, and buckling.</p></div>

Q: Can I pressure wash my own deck?

• <div><p>It is possible to <a href="https://www.angi.com/articles/how-to-power-wash-deck.htm">pressure wash your deck</a>, but it&rsquo;s usually best to leave the work to a professional for two main reasons. First, power washers are expensive, and you can avoid high upfront costs by hiring a deck washing pro instead. Second, you must be careful to use the correct setting to avoid damaging your deck material. You can only clean soft woods like pine with a wide spray and a low pressure; otherwise, the water will leave unpleasant marks on your deck. Hard woods, composite material, and metal can stand up to increasingly higher water pressures.</p></div>

Q: How many board feet are in a 2x4?

• <div><p>There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You&rsquo;d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet. </p></div>

Q: What is the best way to clean your decking?

• <div><p>The best way to clean your decking is to clear debris from the gaps between the boards, sweep the surface, rinse it, apply cleaner, rinse again, and let it dry fully. A homemade deck cleaner made of two gallons of warm water and 1/2 cup vinegar is a simple cleaning solution for both wood and composite decking. You can sprinkle baking soda on any spots with mold or mildew, then scrub the area and rinse clean. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your deck maintenance project in Gerber, CA?

Select your specific project to find the pro for you.

Find Deck maintenance specialists in Gerber

Mega Power Electric, Inc

5.0(

191

)

Serving Gerber, CA and surrounding areas

In business since 2000

Free estimates

Emergency services offered

Founded in 2000, for over 20 years Mega Power has been one of the premier solar companies in all of California, including many cities like Los Angeles, Riverside, Santa Clara, Granite Bay, Van Nuys, San Francisco, San Jose, Pasadena, Sacramento. Complete customer satisfaction, personalized approach and attention to details are our company’s intrinsic core values. We are providing the highest quality service as we enable our customers to save money, increase their property value and help improve the environment. Our team of certified professionals takes genuine pride in giving smooth, practical, Eco-friendly and positive solutions to our residential, commercial and industrial customers’ needs. All equipment and services meet both National Electrical Code requirements and local building codes. Mega Power offers a range of options toward green and energy-efficient solutions to all electrical power needs. We have extensive experience in building a complete solar panel system of all sizes on the roof or on the ground. Mega Power installs them with interconnection to the utility provider so that you could successfully sell excess electricity.

+32

Recommended by100%of homeowners

Request Quote

Michael Watson Painting Facebook

4.9(

)

Serving Gerber, CA and surrounding areas

In business since 1990

Free estimates

Credit card accepted

Michael Watson Painting has been doing business in the area for over 30 years. Our professionalism, integrity, and attention to detail are what set us apart from the rest. Customer service and satisfactory has and will always be out number one importance. Give us a call today!

Response time6 days

Recommended by100%of homeowners

Serving Gerber, CA and surrounding areas

In business since 2001

Free estimates

McNally Construction is your full service contracting company with the ability to take on large and small jobs in and around your home. We can do everything from interior trim to fixing a fence! Commercial Buildings, Concrete tilt ups, Foundations, Slabs, Stamp Work, Stairs and underground concrete vaults

Recommended by100%of homeowners

Serving Gerber, CA and surrounding areas

In business since 2004

Free estimates

Nor Cal Lawn Care is a respectable and reliable company that specializes in customer service and satisfaction. We take pride in our work and get the job done right the first time.

Request Quote

Kuhno's Roof and Surface Cleaning

New to Angi

Serving Gerber, CA and surrounding areas

Free estimates

Small jobs welcome

Offers commercial services

Kuhno’s Roof & Surface Cleaning Services\nWe specialize in restoring the look and life of your home with professional roof and exterior cleaning.\nOur roof cleaning service safely removes buildup and stains to bring your roof back to life while helping protect it from long-term damage.\nWe also offer power washing and surface cleaning for driveways, sidewalks, patios, and other exterior areas.\nUsing professional equipment and careful techniques, we remove dirt, mildew, and grime to leave your property looking fresh and well maintained.\nOur goal is simple: affordable, reliable, and high-quality cleaning services that make your home stand out.\nFirst-time customers can even receive a free small surface cleaning with their first service.\n✔ Roof Cleaning\n✔ Driveways & Sidewalks\n✔ Patios & Exterior Surfaces\n✔ Affordable Prices\n✔ Free Small Surface Cleaning for First-Time Customers\nGive your home the clean it deserves.\nContact Kuhno’s Roof & Surface Cleaning Services today for a free estimate.

Request Quote

SNN Builders

New to Angi

Serving Gerber, CA and surrounding areas

Free estimates

Emergency services offered

Warranties offered

SNN Builders Construction is a family-owned and operated, licensed and insured California contractor proudly serving Sacramento and surrounding areas. With over 5 years of hands-on experience, we specialize in siding, window and door installation, custom deck construction, and bathroom remodeling.\n\nAs a family company, we take pride in honest communication, dependable timelines, and quality craftsmanship on every project. Our goal is to treat every home as if it were our own, maintaining clean job sites and delivering durable, long-lasting results.\n\nWhether you’re upgrading your home’s exterior, replacing outdated windows and doors, building a new deck, or remodeling your bathroom, our team is committed to your satisfaction from start to finish.\n\nCSLB License #1113556\nFree estimates available.\n

Request Quote

Deck Maintenance questions, answered by experts

In most cases, sanding an old deck before staining it is necessary to achieve a decent finish. If your old deck has a relatively new stain finish on it and you're only doing touch-ups, you can generally skip the sanding part. However, if your goal is to make the deck look and function better, sanding first is a must.

Any wood deck provides some ventilation to the area below, as is the nature of that type of deck design. However, areas that experience excessive humidity and associated moisture benefit greatly from a dedicated ventilation system in the form of strip vents. This addition helps the various wood boards contract and expand evenly throughout the years and reduces the chances of twisting, warping, and buckling.

It is possible to pressure wash your deck, but it’s usually best to leave the work to a professional for two main reasons. First, power washers are expensive, and you can avoid high upfront costs by hiring a deck washing pro instead. Second, you must be careful to use the correct setting to avoid damaging your deck material. You can only clean soft woods like pine with a wide spray and a low pressure; otherwise, the water will leave unpleasant marks on your deck. Hard woods, composite material, and metal can stand up to increasingly higher water pressures.

There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You’d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet.

The best way to clean your decking is to clear debris from the gaps between the boards, sweep the surface, rinse it, apply cleaner, rinse again, and let it dry fully. A homemade deck cleaner made of two gallons of warm water and 1/2 cup vinegar is a simple cleaning solution for both wood and composite decking. You can sprinkle baking soda on any spots with mold or mildew, then scrub the area and rinse clean.

The Gerber, CA homeowners’ guide to deck maintenance services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Mitchell Grant
•
May 2, 2026May 2, 2026
How Much Does a Pressure-Treated Wood Deck Cost? [2026 Data]
Looking to update your yard with a new outdoor entertaining area? Learn how much a pressure-treated wood deck costs and how to estimate your total.
Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
Cost to Seal or Waterproof a Deck [2026 Data]
Sealing a deck is important for protecting it against the elements. Find out the cost to seal a deck, whether you DIY or hire a pro to do the job.
Angi
•
May 30, 2026May 30, 2026
How Much Does Steel Deck Framing Cost? [2026 Data]
Discover steel deck framing costs, including material, labor, and installation factors. Learn how to budget and choose the best option for your home project.
Jenna Jonaitis
•
Apr 5, 2026Apr 5, 2026
Top Deck Maintenance Tips for Every Decking Material
Deck maintenance is vital to protecting a wooden deck. Cleaning, staining and sealing a deck after pressure washing will add years to its lifespan. Protect a deck by following these deck maintenance tips for cedar and other types of wood materials.
Ben Kissam
•
Apr 5, 2026Apr 5, 2026
Porches, Stoops, Decks, and Patios: What Are the Differences, and Which Is Best for You?
Outdoor living structures such as porches, stoops, decks, and patios are all common ways to make your house stand out. Here’s the difference between the four types of structures and what to consider when building one for your home.
Deirdre Sullivan
•
May 3, 2026May 3, 2026
What Is Trex Decking? Everything You Need to Know
Take a deep dive into Trex decking by learning about its pros, cons, pricing, and more. Read on to learn more about Trex decking options.