Get matched with top storm drain installation pros in Fowler, CA

The time to install a storm door varies based on who is doing the work and the complexity of the job. Professional installation typically takes a few hours, often between 1 to 2 hours, ensuring a perfect fit. For a DIY project with a standard, pre-hung storm door, you can expect it to take about 3 to 5 hours. However, if the door opening needs to be expanded or significant frame adjustments are required, the installation could take more than a day, in which case hiring a professional is recommended.

Homes need solid construction to survive a hurricane, including these parts:

• A secure foundation at the right elevation for your home’s flood threat level

• Hurricane straps to secure your home’s foundation

• Waterproof basement sealant or rubberized sheeting that directs water away from the foundation

• A strong, well-attached roof that’s firmly secured to the framing

• Shutters or roll-down window protectors that you can close outside to prevent broken windows

• A garage door bracing system to keep high winds from caving in or tearing off the door

• Deadbolts to keep your exterior doors in place against wind pressure and floodwater

It does matter which way a hinge is installed because it’s possible to install a hinge backward. The hinge pin should face the direction in which the door will swing, making the pin visible. Exterior doors that swing outward need a security hinge with an Allen set screw in the center to prevent someone from removing the hinge from the outside and accessing the home or business.

You can determine what size storm door you need by measuring for the storm door. Take the width at the top, middle, and bottom of either your front door or an existing storm door, then measure the height on the left, center, and right of the door. Buy a storm door that matches your measurements' smallest width and shortest height.