Get matched with top animal fencing pros in Firebaugh, CA

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

The cheapest fence to install is likely to be a wire fence, whether it’s hog wire or chicken wire. Closely following that is something repurposed that would be free to collect, like a DIY pallet fence. Most wire fences are available in large quantities at a low cost, so they’re great for homes with a tight budget.

A high-quality wrought iron fence should last you a lifetime, but it will require some TLC on your end. Wrought iron fences are incredibly strong and durable, but they can be susceptible to rust and corrosion, so you’ll need to clean and refinish your fence every two to three years. If you notice rust developing, hire a professional fence repair company to clean the rust and reseal the area of fencing to prolong its life span.

When it comes to materials, wire fences are the cheapest option. The average cost for a 150-foot wire fence is $1,350. The next cheapest material is chain-link, followed by wood.

As far as the style of fence, smaller, less private fences are cheaper than large, elaborate fences that block your whole yard. That’s why split-rail fences are the cheapest option for wooden fences. They cost roughly $10 to $30 per linear foot.