Get matched with top stucco pros in Cutten, CA

It typically takes around 30 to 60 minutes for a window pro to replace one window in standard siding types, but a window in stucco will likely take a bit longer because of the density of materials. Custom architectural windows usually require a longer replacement process because of the additional fitting and securing required.

A standard drill will work just fine if you’re drilling small holes, and only a few of them. But anything with a diameter larger than 3/8 inch is best done with a hammer drill, since it is stronger, faster, and also makes your drill bits last longer. While you don’t absolutely need a hammer drill for stucco, it is a worthy investment if you think you might drill more holes down the road.

To repair damaged exterior stucco, you’ll first remove all loose and crumbling material from the damaged area. You then need to thoroughly clean the area and dampen it to ensure proper bonding. After that, you’ll apply a bonding agent to the repair area, then apply new stucco in layers, allowing for curing time between each layer. The final coat should be textured to match the surrounding stucco pattern as closely as possible. Once fully cured, the repaired area can be painted to match the rest of the wall if needed.

Cracks in the chimney can be very serious, depending on their location and size. Even small cracks can become serious over time if left unrepaired. Cracks allow heat and moisture to deteriorate your chimney and harmful carbon monoxide gas to seep into your home. Small cracks can often be caulked, while large cracked sections may require full replacement.