Best pool and spa technicians near Tusayan, AZ

Biofilm growth can cause a hot tub to feel slimy. Hot tub biofilm is a slimy substance that’s typically due to natural contaminants like makeup, soaps, skin oils, deodorants, or lotions. A hot tub can also have a slimy interior or slimy water if the tub’s filters are old or damaged, or if the hot tub isn’t properly cleaned. You should drain your hot tub, wipe away any slimy residue, then refill the water and use a spa purge product that prevents the buildup of biofilm.

For a fully-foamed hot tub, freezing typically occurs when the temperature drops below 28 degrees Fahrenheit and remains at or below this level continuously for a minimum of 36 hours. If your hot tub and pumps are still operational, however, the water circulates, and this continuous movement helps prevent freezing, even in very cold conditions. This circulation, along with the insulation provided by the foam, helps maintain the water temperature and prevent it from freezing during extended cold periods. Still, if you’re not planning to run it regularly, be sure to winterize the hot tub properly to prevent damage from freezing.

You’ll know you need to replace the pump in your hot tub if you hear loud or unusual noises when the machine is running or notice a significant decrease in water pressure. A leak or altogether failure of the hot tub may also indicate a problem with the pump, but you’ll need a professional to investigate the source of the issue.

Yes, hot tubs can use a significant amount of electricity, primarily to keep the water heated. A typical hot tub uses between 1,500 and 6,000 watts, and the pump can add another 1,500 watts. This usage can result in a monthly cost of around $20 to $30. The exact amount of electricity consumed depends on several factors, including the hot tub's age, size, heater voltage (120V vs. 240V), usage habits, and thermostat setting. Newer, energy-efficient models generally use less power than older ones. To reduce electricity costs, consider investing in an energy-efficient model, using a quality insulated cover with a thermal blanket, and keeping the filters clean.