Get matched with top deck staining pros in Pirtleville, AZ

You may be wondering: can you paint cement? Fortunately, the answer is yes.

To change the color of your cinder blocks, you have two options. You can either paint them or stain them. Either way, you'll be able to choose from a wide range of color options. Some popular colors for cinder block painting include off-white shades and gray tones, which add a modern spin to the traditional gray blocks.

Deciding whether to stain or paint a pool deck depends on your budget, desired look, and the deck's material. Both options can work. Paint offers a wider variety of color options, provides excellent water resistance, and can last longer. However, it requires a primer and can eventually fade or peel. Stain is often cheaper, easier to apply, and penetrates the wood for a more natural look and longer-lasting finish. It also has great water resistance. The downsides are fewer color options and the need for a sealant. The choice can also depend on the deck material; for example, staining may be a better option for concrete as it bonds well and lasts longer than paint.

Yes, it is generally a very good idea to seal your deck after pressure washing. Power washing removes not only dirt and debris but also a thin layer of wood, leaving the surface exposed and more susceptible to weathering. Sealing is almost always needed after this process. After a general cleaning, sealing isn't automatically necessary if the existing sealant is still intact. You can test the surface by placing a few drops of water on it. If the water beads up, the sealant is working. If it soaks into the wood, it's time to apply a new sealant. If it has been a few years, it's wise to remove the old sealant, wash the deck, and reseal for maximum protection.

Your tool of choice ultimately comes down to personal preference. Many DIYers prefer applying stain with a lint-free rag, but others stick with a paint brush or a roller. Wipe the stain and work it into the wood, working with and against the grain. If you’re applying multiple coats, allow the stain to dry for around four hours between coats.