"I chose them because the pitch man convinced me they were the best and they were $260 while others I called were $300 and adding termite inspection was $325 and his was included in the $260. On Monday morning at 8am of the planned inspection day, we found the 'current' owner had not turned the electricity on thus, the inspection could not take place. We were emailed the bill would be an additional $65 for the trip charge as it was a good 100 miles round trip and our error, not theirs. I felt bad so I accepted the additional charge. There went my saving a buck. Next we were emailed a new appointment day, Thursday at 11am. The inspector arrived Thursday at 8am. Needless to say, it confused my whole day arriving three hours early. The inspector really did a good job, explaining everything to me so that I understood. Then he presented me with a $325 bill that we had agreed on and I paid. It being early in the morning I wasn't thinking clearly but later I called the business office and said - "Since we have an email stating 11am and the inspector showed up at 8am, your mistake, so I should get my $65 back from the trip charge when it was our mistake." The business office wanted nothing to do with that idea. The $65 was for the extra time and mileage, she said. What about the disruption to my schedule showing up at the wrong time. It didn't matter. Every other time I spoke with the woman in the office she was very kind but suddenly she wasn't any more. Because they strictly wouldn't change the bill when it was their fault and because they are so far away, I will not use this company again. "
"It went exactly as planned. Adan Montoya was very communicative, helpful and patient throughout the project. He is friendly, fair, conscientious and hard working."
David Castro Handyman is a company that strives for excellence and brings its experience and professionalism to every project large or small. With many years of experience I maintain a standard of excellence that will shine through on your unique project too. Whether you are repainting, repairing small things around the house or needing any general handyman services I will not hesitate to show you that my firm is the only one you need call. Call me today for a free, professional estimate.
Welcome to Joey Builders Inc! We take pride in the quality of work and customer satisfaction that we give each and every customer! We are known to pay exquisite attention to detail while making customer satisfaction our top priority. Call us today to learn more about how we can help you!
You do not have to dig footers for a deck as long as it meets local code and holds up to weather in your area. If you live somewhere that experiences high winds and earthquakes, you may need to dig for your deck posts. Deck blocks, post anchors with base plates, and helical pile systems are the three no-dig deck post options you can choose from if local code permits.
Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.
There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.
Building codes for deck railings can vary by location, so it's important to consult your local regulations before construction. Generally, a guardrail is required for any deck that is more than 30 inches above the ground.
For residential properties, the standard minimum height for a deck railing is 36 inches. However, some states and municipalities have stricter requirements; for example, California and Washington mandate railings that are at least 42 inches high. Therefore, a 42-inch railing is not considered too high and may be required in your area or chosen voluntarily for additional safety.
In addition to height requirements, codes also specify other safety features, such as the maximum spacing between balusters to ensure they are close enough to prevent a child from squeezing through.
When building an outdoor or deck gate, it's crucial to use durable wood that can withstand harsh weather conditions like sunlight, rain, wind, and snow. Redwood and cedar are excellent choices as they naturally resist decay. While redwood is considered more elegant, cedar is a more affordable option. Other suitable woods include oak and pressure-treated pine, which is specifically treated to resist rot. Although some softwoods like pine are popular, untreated softwoods such as pine and spruce should generally be avoided for outdoor projects because they are susceptible to damage from water, rot, and the sun. Ultimately, it's wise to consider your local climate when selecting the right wood for your gate.
The proper and most comfortable height for a deck stair riser, also called a step, is between four and seven inches. A height of seven inches is often considered ideal for a strain-free step that minimizes the risk of trips and falls. While it is possible to have risers up to 12 inches, this height can be challenging for children, pets, or individuals with mobility issues. For optimal safety and comfort, pair a seven-inch riser with a tread depth (or run) of at least 10 to 12 inches. Always check your local building codes, as they may have specific requirements that differ from these general recommendations.
The Peridot, AZ homeowners’ guide to deck maintenance services
From average costs to expert advice, get all the answers you need to get your job done.
Deck maintenance is vital to protecting a wooden deck. Cleaning, staining and sealing a deck after pressure washing will add years to its lifespan. Protect a deck by following these deck maintenance tips for cedar and other types of wood materials.
Finding maintenance-free decking that works for your home, budget, and lifestyle can be challenging. This guide lists the 7 best low-maintenance deck materials.
