Get matched with top percolation testing pros in Leupp, AZ

According to the Environmental Protection Agency (EPA), you should contact the following officials to report a case of asbestos exposure:

• Asbestos subject matter experts in your state 

• EPA regional office

• Toxic Substances Control Act (TSCA) Assistance Information Service Hotline via mail, email, or phone

• EPA’s Asbestos Ombudsman via phone or fax 

Epoxying over asbestos tiles is generally considered a safe option when done correctly. Epoxy acts as a sealant, encapsulating the asbestos tiles and preventing the release of asbestos fibers into the air. The key is ensuring that the asbestos tiles are in good condition, firmly adhered to the substrate, and not damaged or deteriorating. This method is only appropriate for tiles that are undamaged and securely in place. If the asbestos tiles are already loose, damaged, or deteriorating, encapsulating them with epoxy may not be a sufficient solution, as it might not address the potential for ongoing asbestos exposure.

Asbestos testing takes place in two stages—collection and lab testing. Collection can take less than 20 minutes if a professional manages to get a direct sample. If air samples are required, then the pro will set up a testing device and return to collect it. In both cases, the sample is sent to a lab and results are confirmed or denied usually within one to two days.

It is strongly advised not to touch or disturb asbestos-containing materials unless necessary. Asbestos fibers can be released into the air when the material is damaged or disturbed, posing serious health risks if inhaled. It is best to leave any handling of asbestos to trained professionals who can remove the asbestos safely.