Get matched with top gutter repair and replacement pros in Cibecue, AZ

Gutters should not drip at the seams. This problem could indicate that water is collecting in the gutters instead of moving to the downspouts. You could have leaves or other debris blocking the flow of water at the seams. Try cleaning the gutters, adjusting the slope, and sealing any holes or cracks in the material to fix this problem.

When you need to repair your galvanized gutters from leaks and caulk isn’t doing the job, you can solder your gutters with a roofer’s soldering iron. First, you’ll need to clean your gutters thoroughly with a wire brush and remove rust and oxidized paint. Next, you’ll make weld points on the gutter and solder over the connection until it’s completely smooth. You can also hire a roofing company near you to tackle this project.

Unless you've chosen to install underground downspouts, your gutter downspouts shouldn't touch the ground. If they come into contact with the soil or pavement next to your home, rainwater can back up into them during a storm, preventing them from doing their job effectively. Instead, aim to have your downspouts end about 12 inches from the ground.

Yes, it’s possible to replace only one section of a gutter, and it’s a common repair. Often, a tree limb will damage a gutter on one side of the house, or constant weather will cause early corrosion. Gutters are often joined together with couplings that are easy to remove and swap out. For this reason, some homeowners will purchase extra gutters when they install them to have spare sections to use for replacement later.