Get matched with top glaziers in Pine Bluff, AR

Using caulk is one of the simplest and most recommended methods to finish glass tile edges. It creates an elegant seam between the glass tile and the adjacent area, along with a waterproof seal. With this method, you want to use a caulk color that matches the grout and, along with the grout, compliments the tile. Make sure the caulk line is smooth and even. Alternatively, you can use a bullnose or tile trimming to edge, however, that will also require caulk to seal.

Generally, large bathroom mirrors that have been secured to the wall with glue require a multistep removal process. By taping the mirror with masking tape or duct tape, you can potentially prevent dangerous shards from falling as you loosen the mirror. A heat gun or other heat source may be needed to loosen up the glue before it can be freed using a wire saw. With glued-down mirrors being the most dangerous to remove, it's wise to hire a professional instead of handling glass on your own.

This can be a matter of personal preference, but a good rule of thumb is to center your bathroom mirror over the sink’s faucet. In some cases, if the sink is off-center in the vanity or  you have multiple sinks in the same vanity, you may find it more aesthetically pleasing to center the mirror over the vanity.

Hard water stains are caused by hard water. Hard water contains a lot of minerals, like calcium and magnesium. When water on your glass surfaces dries out, the minerals stay behind and stick to the glass. This results in a residue that looks like white cloudy or streaky spots. Call a pro to install a water softener to banish hard water problems.