Get matched with top concrete driveway pros in Newport, AR

Yes, masonry is more expensive than concrete because the labor is much more involved. With masonry, your expert will build your project from the ground up, one piece at a time, ensuring they use the proper amount of mortar or grout during construction and keeping the project level or plumb. Pouring concrete can also be labor-intensive, but it’s a bit less involved. It requires building a mold, pouring the concrete, and letting it cure. The less intensive labor makes concrete a more affordable option in most cases.

Pervious concrete should be between 4 and 8 inches thick to drain water properly. Surfaces like parking lots and driveways should be at least 6 inches thick to accommodate the weight of vehicles, while patios and walkways may be poured between 4 and 6 inches thick. There’s no standard for pervious concrete thickness, but in most cases, the more weight the surface will need to hold, the thicker it should be.

Two types of masonry are veneer masonry and solid masonry. Veneer masonry is thin brick or stone material attached to the face of a building. With veneer masonry, the walls support the weight of the masonry products rather than the masonry being built on a concrete footing. Solid masonry is a wall or other brick or stone structure built on a concrete footing, and the masonry supports itself.

Minor hairline cracks in your concrete may not look pretty, but they’re often not serious. It’s when concrete cracks are larger—wide enough that you can slide a credit card into it—that you need to worry. If you monitor a crack and can trace its active expansion over time, you’ll definitely want to call in a pro to inspect it and, potentially, repair it. Want to prevent cracks in your garage and driveway concrete in the future? Stay on top of sealing. Here’s how to seal your concrete garage floor and driveway.