Get matched with top decorative concrete pros in Newark, AR

Two types of masonry are veneer masonry and solid masonry. Veneer masonry is thin brick or stone material attached to the face of a building. With veneer masonry, the walls support the weight of the masonry products rather than the masonry being built on a concrete footing. Solid masonry is a wall or other brick or stone structure built on a concrete footing, and the masonry supports itself.

Yes, pressure washers can remove rust stains from concrete. However, when coupled with an acid treatment, they can be even more effective. Just be sure to use a minimum of a 15-degree nozzle to prevent damage to the surface, and users must also be careful not to get in the way of the pressure washer’s jet as they can cut through skin and cause injury. 

The cost of asphalt driveway repair is usually similar to the cost of average concrete driveway repairs, but maintaining asphalt tends to be less expensive on a per-instance basis. For example, resurfacing asphalt costs about $1 less per square foot, but it doesn’t last as long as concrete and will need more frequent repairs. An asphalt driveway lasts 20 to 25 years, but a well-maintained concrete driveway can last twice as long, so the maintenance costs and timeline even out.

No, wet concrete will not bond to dry concrete without an additional bonding agent. The common alternative is adding a sand or gravel layer under a concrete slab to enhance bonding and create a stable foundation. The right choice depends on the height and thickness of your two slabs, local laws, and the use of the specific concrete slab.