Get matched with top decorative concrete pros in Heber Springs, AR

It depends on whether you think it is worth it to make your own concrete. While you can save a lot of money making your own concrete and pouring your own concrete slab, it's an advanced DIY. Adding too much or too little water can offset the savings of skipping the professional, as the wrong mixture will not allow the concrete to cure properly for your unique project.

Most of the time, you or your contractor will spray the concrete form and framework with a release agent or oil to prevent sticking. This is common practice with wood and steel forms. For insulated concrete forms, the styrofoam formwork often remains in place after construction, so you don’t need to treat it beforehand. Foam concrete forms made out of melamine also may not need treatment beforehand, as the material naturally won’t stick to the concrete after it’s cured.

When comparing fence post foam versus concrete, concrete is considered more durable and stronger. Concrete is a stronger material that can handle larger amounts of weight, making it a good choice for load-bearing posts. For posts on smaller fences or fences made with lighter materials, like vinyl or wire mesh, post foam is a good choice.

If your epoxy application ended up a bit messy and left spills behind, there are several ways to clean epoxy off of a concrete floor. You can use a power washer with at least 3,000 PSI. However, it may be easier to use a scraping tool or an acidic cleaner, like vinegar, to remove unwanted epoxy. 

If the entire floor has epoxy and you want to remove just excess epoxy stains, these methods could still strip parts of the epoxy floor. Move carefully and in small areas to minimize damage, or call a pro for an expert finish.