Top-rated door pros.

Best door pros near Mccrory, AR

Enter your zip and get matched with up to 5 pros

Need a pro for your door service project in Mccrory, AR?

Select your specific project to find the pro for you.

Top-Rated Door pros in Mccrory - Updated Nov 2026

Jared
New to Angi
Doors - RepairSliding Door or Tracks - RepairStorm Door - Repair

Serving Mccrory, AR and surrounding areas

Approved

My name is Jared and I enjoy what I do for a living. I offer professional and quality services in home remodeling and I take my time and do everything the customer asks. I have been doing construction since I was a young man at the age of 16 and I'm 47 year's old now,In. 2026.. If you have any questions about anything else please contact me and I'll try my best to answer any questions you have about any project.Also thank-you for reading and have a wonderful day.

Avatar for Sears Home Improvement - Doors
Sears Home Improvement - Doors
2.1(
57
)
Doors (Exterior) - Install or Replace

Serving Mccrory, AR and surrounding areas

In business since 1893

Free estimates

Warranties offered

Make a lasting impression with a new Entry Door from Sears. ENERGY STAR� rated custom entry doors provide security, peace of mind and energy efficiency. \n \n \n* Ask About 12 months no interest \n (If paid in full within 12 months)

Before
After
Recommended by65%of homeowners
Showing 1-10 of 48
Doors FAQs, answered by experts

Most modern, standard doors are 1 ⅜-inches thick, so you should aim for this thickness unless you're building a door to replace an antique door or fit into a non-standard wall opening. Thickness varies when installing a pocket door or sliding barn door, so a good rule of thumb is to measure your existing door, if possible. For standard doors, you can also measure from the inside of the door to the door stop to gauge the proper thickness.

Plenty of building codes dictate what you must install in your home, but door sweeps are optional. However, they're a low-cost addition with many advantages. So, installing a sweep on all your exterior doors is in your best interest. You'll save money in the long run and stay more comfortable year-round.

When hanging a door frame, it’s recommended that you use screws, not nails. Screws are more secure, easier to tighten, and easier to remove if you need to adjust the frame. On average, the cost to replace a door frame is about $400, but you can save on labor costs if you’re confident in your ability to DIY the project. 

Yes, but adding a deadbolt to some door materials, like steel, may make installation a little bit trickier. For these materials, you will want to hire a locksmith to do the work for you, but be aware that they may charge an additional fee of $25 to $50 or more.

To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.

The Mccrory, AR homeowners’ guide to door services

From average costs to expert advice, get all the answers you need to get your job done.