Get matched with top holiday decorators in Dierks, AR

The length of time shouldn’t matter much if you stick with lightweight Christmas lights and similar decorations. Those shouldn’t pose risks to your stucco. You should avoid attaching anything to your stucco that could fall because it’s too heavy, which may take part of the stucco with it. Some methods, like using double-sided tape or adhesive hooks, will naturally wear out over time and lead to falling lights, so don’t expect to leave these lights up year-round.

First of all, don’t shop for bargain lights—often, you’ll end up with a faulty or broken strand, full of dead bulbs or less-than-luminous brightness. Choose quality lights that will last you many years—LED lights have been known to last as long as 100,000 hours. Second, plan ahead and purchase lights for next year’s Christmas during this year’s post-holiday sales. Finally, have a vision and a plan—if you know the measurements of your home, including any windows, doors, and outside bushes you wish to light up, you should be able to only purchase the necessary lights and not more than you need.

The cost for professional holiday light installation averages around $430, with a typical range of $220 to $675. However, prices can be as low as $100 for simple projector setups or exceed $1,200 for extensive displays. The total cost depends on factors like the display's complexity, your home's size, labor rates in your area, and the type of lights used. For example, installation on a small, one-story home may cost $250 to $600, while a multi-story home over 4,000 square feet could cost $500 to $1,800. Costs can also be broken down by location (e.g., high roofs at $3.50–$6 per linear foot) or by the type of light strand, with prices ranging from $4 for basic incandescent strands to over $60 for color-changing LED strands.

You can take a few steps to prolong the life of your holiday lights. Make sure to replace burnt-out bulbs as quickly as possible to avoid overloading the rest of the circuit and knocking out more lights. Before packing them up each year, plug each strand into the wall to confirm everything is still working. Wrap the lights carefully back into their original packaging or something similar—winding a strand tightly together or leaving it to hang loose in a storage bin can lead to frayed or damaged wiring.