Best door pros near Dierks, AR

If you don’t know which door sweep to buy, look into getting a strip or bristle sweep. They’re easy to find at the store, work well for most doors, and the simple installation is DIYable. Before buying one, measure your door width and make sure the one you want is long enough. Most door sweeps are 36 inches long, and you can cut them down to size with a hacksaw.

Most modern door knobs will all fit in standard, modern doors, so if you know your door was made in the last 50 years or so, you should be fine buying a standard replacement door knob. The only exception would be a thumb latch handleset for an exterior door, as this type of door knob may not fit your door without drilling a mounting hole for the bottom of the handle. Antique or custom doors might also have different sizes and knob mounting holes, so call in a professional if you don’t believe your door is a standard one.

As long as you do it carefully, you can sand and restain hollow core doors. However, it’s risky because the veneers on hollow core doors are so thin that sanding and restaining might cause damage to the doors. If you do move forward with this project, sand the doors lightly with a medium-grit sandpaper.

While not strictly required, it is highly recommended to shim both sides of a door. Shimming both sides allows you to make minor adjustments for wall framing that isn't perfectly plumb, ensuring the door is level and hangs evenly. This practice helps the door swing open and close smoothly, reduces the chances of the frame warping, and can be used to center the door within the wall opening. If you are working alone, you may find it easier to remove the door slab to lighten the weight while supporting the frame and inserting the shims. With two people, the process is generally faster and easier, whether the slab is left in place or not.