Get matched with top concrete finishing pros in Danville, AR

You can pour concrete over existing concrete and then stamp it to create an overlay. The old concrete must be prepared correctly for the new concrete to adhere properly and create a strong, stable surface. Stamping the new concrete creates a patterned finish that adds visual interest and an upscale feel.

A layer of exposed aggregate concrete should be 1 to 2 inches thick if you’re installing it on top of existing concrete. If you’re pouring a new slab with the finish, slab thickness will depend on the application. Exposed aggregate concrete driveways should be 4 to 6 inches thick in most cases or 8 to 12 inches for commercial vehicles. Sidewalks, patios, and walkways should be 4 inches thick.

You can whiten concrete for unsealed and unfinished concrete with a solution or either muriatic acid or bleach and water—but never both. However, if your concrete does have a stain, finish, or polish, keep in mind that these hard chemicals could damage the topcoat. Your best bet otherwise is to power wash outdoor concrete slabs or clean indoor ones with a gentle cleaner such as laundry or dish detergent.

Yes, you can paint a flagstone patio, but ensure you choose a durable latex paint specifically designed for outdoor use and heavy foot traffic. An elastomeric latex paint will fill in all the gaps and create a waterproof seal over the stone. Even the best products made for foot traffic can last for one to two years, on average, so be prepared to reapply paint regularly.