Get matched with top deck maintenance specialists in York, AL

Will pressure-treated wood rot? This wood could eventually suffer from rot, although it takes longer compared to untreated wood. Even though the chemicals applied to pressure-treated wood protect it, they eventually dissipate and leave the wood vulnerable. You can delay the appearance of rot in the treated wood by reducing its direct exposure to moisture and by painting it. Using fewer screws or nails in the wood—and thereby creating fewer holes in it—also delays the chances of rot forming.

It is definitely worth sanding a deck to ensure the wood absorbs new stain. Sanding a deck removes the outer layers of aging wood, allowing the stain to penetrate. It also gives a fresh look to the entire surface as part of the deck refinishing process. Without sanding, your stain or sealant is less likely to absorb into the wood. While sanding a deck is a time-intensive project, the rewards are noticeable and long-lasting.

Composite decking may never warp, or it may warp quickly. Several factors can influence the rate of warping, including the material's quality, installation method, and installation location. Generally speaking, high-quality materials that have been installed properly are drastically less prone to warping.

Deck skirting shouldn’t touch the ground, especially if you have a wood deck, which is vulnerable to moisture. Ideally, you should leave at least 3/4 of an inch of space between the deck skirting and the ground for more ventilation. Pros also recommend that you incorporate about 1 square foot of space for ventilation for the underside of the deck to every 150 square feet of decking. Proper ventilation prevents mold growth and rot that can damage your deck.