Get matched with top masons in Vernon, AL

The cost of masonry work varies widely depending on the type of masonry along with common cost factors like size, complexity, location, and season. Most exterior masonry work done in freezing temperatures tends to cost more because of the preparation and protection involved to keep the masonry from freezing before the mortar cures properly. The average price ranges per project or square foot for different types of masonry include:

• Brick wall (fence, garden wall, etc.): $10–$45 per square foot

• Natural stone wall: $40–$110 per square foot

• Manufactured stone veneer: $20–$40 per square foot

• Brick home exterior: $10–$30 per square foot

• Brick siding: $3–$10 per square foot

• Stone siding: $35–$50 per square foot

• Brick step replacement: $20–$30 per square foot

• Brick wall repair: $20–$40 per square foot

• Chimney repairs: $160–$750 per project

• Tuckpointing: $5–$25 per square foot

To stain brick, you should use a product specifically formulated for brick, concrete, or other masonry surfaces. These stains are designed to penetrate the porous surface of the brick and bond with it. This is different from paint, which sits on the surface and is prone to peeling, flaking, and trapping moisture that can cause damage. Water-based brick stains are often recommended because they are easy to apply, even for DIYers, and they allow the brick to breathe. Avoid using regular paint on brick, as it will not adhere properly and can lead to future maintenance problems.

Stone houses used to be much more practical, but with the advent of stronger and cheaper materials like concrete, they aren’t seen as much anymore. There are some parts of the world where it makes sense to build with stone, and they are usually next to a stone quarry. Stone is, however, very weather-resistant, which is why many homes near the sea and on mountains are still built with local stone.

When painting brick, each application method has distinct advantages and disadvantages. Spraying is significantly faster but may not penetrate deeply beyond the surface layer. Rolling is effective for working paint into the brick's texture but can be less effective on mortar joints. If you opt for a roller, choose a thick nap of at least a half-inch to ensure paint gets into all the crevices for even coverage. Using a brush is generally not recommended as it is very time-consuming and provides poor surface penetration. Ultimately, a combination of spraying followed by back-rolling is often the best strategy for a durable and even finish.