Get matched with top drywall pros in Seale, AL

On average, drywall installation costs around $2,000, with a typical range of $400 to $6,000, including materials and labor. The final price depends on several factors. The most significant is the size of the area, as many contractors charge per square foot. Other cost factors include the complexity of the job (e.g., cutting around multiple windows and doors, corners, or curved walls), accessibility, location, the thickness of the drywall, the height of the room, and the desired level of finish. The level of finish can range from simply hanging the drywall to taping and mudding the seams and painting the walls.

In most cases, no, you won’t need a permit to replace drywall. If you’re changing the floorplan of your home by adding or removing walls during the drywall project, then you might need a permit, but replacement or repairs usually doesn’t require a permit. Your drywall professional should be able to confirm whether or not a permit is required for your project. If it is, it’s likely to add between $50 and $150 to your total cost. Keep in mind that you will need permits if you plan to install new electrical wiring or plumbing lines behind your new drywall.

There are six levels of drywall finish, from 0 to 5, that refer to the amount of work performed during the finishing process.

Level 0: Drywall is hung with no finishing work.

Level 1: Tape is placed over the seams between drywall sheets.

Level 2: A thin layer of mud is applied over the tape and screw holes. This level is common for utility rooms or walls that will be covered.

Level 3: A full coat of mud covers the screw holes and tape, but the surface is not sanded. This is often used in garages.

Level 4: This is the most common finish for visible interior walls. It involves applying two coats of mud over seams and screw holes, with sanding between each coat, creating a smooth surface ready for flat paint.

Level 5: This is a high-end finish for luxury homes. It includes full taping, mudding, and sanding, plus a final skim coat over the entire surface before painting.

Most repairs take 1-3 days, depending on drying times for joint compound and paint touch-ups.