Get matched with top deck maintenance specialists in Sawyerville, AL

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

Before installing a new railing, check the condition of the deck frame and joists, especially around the perimeter where posts attach. If boards are loose, soft, or show signs of rot, the structure may need repair. A deck pro can inspect your framing to confirm it meets load-bearing requirements.

The cost to repair a deck is between $900 and $3,500, depending on the cause and extent of the damage. For example, fixing a sinking deck caused by pest damage can cost between $200 and $600, while replacing sinking boards costs between $500 and $4,000.

Yes, but it works best with lightweight snowblowers, the single-stage models or electric versions. Also, you need to have a rubberized intake edge on the ground and preferably rubberized auger paddles, not a metal version. Otherwise you may chip or damage the surface as you work. When it doubt, let the snow lie.

You can also use a snow blower on leveled gravel, but only if you carefully adjust the intake height so it doesn’t kick up the gravel and turn it into flying missiles.