Best roofers near Saraland, AL

In some cases, yes, you can put a second roof layer over architectural shingles, but it depends on your home’s structural stability and the local building codes where you live. Architectural shingles are thicker and heavier than standard asphalt shingles, so you may need structural reinforcement or a structural engineer’s inspection before proceeding. Additionally, some building departments don’t allow for two roof layers, regardless of the roof type. You should ask a professional if ripping the old roof off before installing the new one is the best option for you.

The best way to know if your roof can support solar panels is to hire a structural engineer. They’ll look at your roof and approve the design of your solar panel system or suggest changes. The best roofing for solar panels is made from strong materials like asphalt shingles and metal, but tile and gravel will work. Softer materials like thatch or temporary structures are not a good fit.

You can install solar panels on a flat or pitched roof, but keep in mind that they will need to rest at a 30- to 50-degree tilt for optimal sun absorption. It costs more to install solar panels on a flat roof because you will need to install a framing system and likely hire a structural engineer. If your roof has a pitch of more than 40 degrees, it may not be a good candidate for solar panels.

Fall is widely considered the best time of year to replace a roof. The moderate temperatures are ideal for roofing crews to work and for new shingles to seal properly. Additionally, autumn weather is often drier, reducing the risk of weather-related delays compared to the rainier spring season.

While spring is also a viable option, the higher chance of rainfall can slow down the project. The main drawback to a fall installation is that it's the peak season for roofers, which can lead to higher prices and scheduling challenges.

To potentially save money, you could consider scheduling your roof replacement during the summer or winter off-seasons. However, both seasons have significant disadvantages. Extreme summer heat can make shingles too soft to handle, while winter's cold, snow, and ice can create dangerous working conditions and prevent shingles from sealing correctly, as they typically require temperatures above 40-45°F.