Best backsplash installation pros near Foley, AL

Yes, you can install a backsplash directly onto drywall, provided the wall is properly prepped, clean, and dry. For best results, especially in kitchen areas, your walls should be made of moisture-resistant drywall, often called green board. If your current wall isn't moisture-resistant, it's recommended to replace it before installing the backsplash. For even greater protection against water damage, you can remove the existing drywall and install a tile backer board or cement board instead. While properly installed standard drywall is typically strong enough to support a backsplash, some local building codes may require water-resistant materials in kitchen areas, so it's a good idea to check.

There are several different products that allow underwater repair. Pool putty can help repair chips, cracks, and loose tiles without draining your pool, but it should only be used for a temporary fix. Certain two-part epoxy adhesives will cure underwater, too. That said, while it is technically possible to fix pool tiles underwater, it is usually not ideal, depending on the depth of your pool. You will still have to reach the tile, which means you might have to dive and make the repair while submerged.

Travertine is a natural stone, while porcelain is ceramic. You can enjoy the best of both worlds with porcelain travertine tiles. Some people prefer porcelain to travertine because it doesn’t require regular maintenance and it’s easier to clean. Porcelain travertine looks like the real thing but only costs $3 to $6 per square foot.

Yes, but you’ll have to use some other type of tool to avoid damaging the tile and possibly injuring yourself. Some alternatives to tile cutters include a glass cutter, angle grinder, and wet saw. Depending on the tile material, you might simply be able to measure and score it with something sharp, like a carbide-tipped pencil, and break it off. Be sure to sand the edge for a smooth installation.