Get matched with top storm drain installation pros in Dillingham, AK

Like many common door problems, warping can be caused by improper installation. When a door isn't installed correctly, there's a good chance that the poor seal is allowing moisture and drafts to seep through. When this happens, humidity will build up in the wood until it swells and warps.

You can determine what size storm door you need by measuring for the storm door. Take the width at the top, middle, and bottom of either your front door or an existing storm door, then measure the height on the left, center, and right of the door. Buy a storm door that matches your measurements' smallest width and shortest height.

There are a few ways to make your storm door less drafty. For example, if the bottom of your storm door is letting in air, you can lower the door sweep so there’s a smaller gap between your door and the floor. You can also install weatherstripping or apply caulk around the door frame.

The time to install a storm door varies based on who is doing the work and the complexity of the job. Professional installation typically takes a few hours, often between 1 to 2 hours, ensuring a perfect fit. For a DIY project with a standard, pre-hung storm door, you can expect it to take about 3 to 5 hours. However, if the door opening needs to be expanded or significant frame adjustments are required, the installation could take more than a day, in which case hiring a professional is recommended.