"Very great customer service. Came in knocked the job out. Explained everything they did to a tee. I Was very impressed with the quality of work. I would highly recommend them to anyone looking for an electrical work that needs to be done."
"I had Brian of Wiring Up Alaska LLC remove 12 old fluorescent 48” tubes and ballast and rewire the existing fixtures as necessary for new LED fixtures. He was prompt, efficient, and pleasant to have at the house. The proposal I got from Elayne was sent promptly, was very price competitive, and was comprehensive and easy to understand. The proposal included the cost of new LED tubes. The job was done promptly as specified in the bid and we were very happy with the results."
"Michael showed up right on time, removed the old light fixture, installed the new one. He cleaned up the small mess that was made with the project and took the old fixture out with him when he left to dispose of. The pricing was fair and I have absolutely no complaints with the technician that came to do the project or Supreme Electric & will use them again on future projects."
"He came right over on a Sunday and helped drain the crawl space then set up schedule to dry out, replace wet insulation and fix broken pipes. Ordered and later installed new water heater. It was a process but Matt and his associates were super helpful, professional and nice."
"Very well. Great communication the entire time. There were some time set backs due to the pandemic but we were notified of all progress as the job went along. Photos and videos were uploaded to the app they use to keep us informed. The work site was clean and orderly the entire time as well. No issues with debris in the yard or driveway. Overall we had a great experience and would recommend them to friends and family. Very knowledgeable, friendly, and easy to work with. A definite company to consider for all construction or remodeling needs."
Grounding an electrical outlet can take as little as 30 minutes if you only need to replace the outlet or around two hours if you need to add a ground wire. However, more extensive electrical work will take longer, such as hiring an electrician to ground multiple outlets during the same service.
A 60W LED bulb is likely labeled as “60W replacement” on the package—that’s because it provides about the same light output as a 60W incandescent bulb. In reality, it likely uses less energy—usually 15 watts or less. If that’s the case, then it’s perfectly fine to put a 60W LED bulb in a 40W socket. Your best bet is to read the package carefully. It will tell you the LED bulb’s actual wattage, and as long as it’s lower than the fixture, the bulb will be safe to use.
Single-pole switches are simple circuits designed for lower voltages. As such, they don’t require the complex wiring of switches that need to supply power to larger devices and appliances. This is why single-pole switches commonly go in bathrooms, closets, and other small rooms that power a low-watt light fixture. One wire creates the circuit from the power supply, the other goes to the fixture, and the final wire provides safety mechanisms through grounding.
How many string lights can be on one outlet depends on a number of varying factors, including the total wattage of your circuit, the type of lights, the energy needs of the lights, and cord specifications. It’s better to play it safe here to protect your circuit, so figure out the max wattage of your circuit, compare that to the lights, and move on from there. Generally speaking, LED string lights require less energy than incandescent bulbs, translating to a higher number of lights per circuit.
Natural gas and electricity rates vary significantly based on location, and pricing can change over time, too. It’s possible that in locations where natural gas is particularly inexpensive, it will cost less than grid-based electricity will. However, you should also factor in the generator’s initial costs and maintenance needs, as well as its noise level and if it can comfortably power all your home appliances.
The Cordova, AK homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Before you hire a licensed electrical contractor, you should learn the cost to run electric from the road to your house so you can budget for the project.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.
