Get matched with top fencing pros in Chevak, AK

Generally, the height of your dog fence should be 3 times the distance from the ground to your dog’s shoulder. For most small breeds, a 4-foot high fence will be more than enough to keep them from jumping out. Medium-sized breeds like Golden Retrievers, Labradors, and German Shepherds will need at least a 5-6 foot fence to stay contained. Large breeds that are also excellent jumpers, such as Greyhounds, may need a 7-foot high fence. 

You’ve likely been considering lots of wood fence ideas for your yard. There are many reasons why people choose split rail fences time and again. For one, they’re one of the most wallet-friendly fencing options, especially since you don’t need to use much hardware and setting the posts doesn’t require concrete or foam. So if you have a large property and want to fence it in, your best bet may be a split rail fence.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again.