Get matched with top glaziers in Akutan, AK

For small, non-pressure-related cracks, you can fix them using two-part epoxy. This spares you the cost and hassle of replacing the glass. Simply clean the surface and remove any debris or dirt, wait for the glass to dry, then spread an even layer of mixed epoxy solution over the crack. You can use a putty knife or rubber spatula to push the epoxy into the crack.

Black spots on the bottom or along the edge of your bathroom mirror are caused by oxidation behind the mirror glass. When moisture and air are trapped between the glass and the backing, they react and cause discoloration. This is sometimes referred to as “mirror rot.” You’ll need to separate the glass and the backing to fully remove it.

Cutting glass yourself can be dangerous, as the edges are sharp and can easily cause lacerations if you’re not careful. Working with larger pieces of glass is especially dangerous, as they can be cumbersome and difficult to handle without shattering. If you’re uncomfortable doing the work yourself, you can hire a professional to get the job done safely.

You should avoid multi-surface cleaners, bleach, and any cloth or scrubbing material that has a rough surface when cleaning mirrors. Multi-surface cleaners and bleach will get smudges and debris off of the glass, but they more often leave behind cleaner residue because they don’t evaporate like a glass cleaner or rubbing alcohol. Additionally, any abrasive material or even the scrubbing side of a sponge can scratch your glass or coatings on the glass, gradually making the mirror look hazy.