How Much Does a Frameless Shower Door Cost? [2025 Data]
Frameless shower door cost averages $1,400, with most homeowners paying between $1,000 and $2,500. Prices depend on the door size, glass thickness, hardware, and the complexity of the installation.
Frameless shower doors offer a sleek, modern look for any bathroom.
Door size, glass thickness, and hardware are key factors that drive costs.
Professional installation costs $50 to $100 per hour and ensures safety and water-tight seals.
Custom designs and premium finishes increase the overall cost.
Upgrading your shower door can enhance your home's value and bathroom appeal.
This article was created using automation technology and thoroughly fact-checked and edited by an Angi Editor in accordance with our AI policy.
Frameless shower door cost averages $1,400, with most homeowners spending between $1,000 and $2,500 for installation. Prices vary based on door size, glass thickness, and the type of hardware chosen. Expect to pay a minimum of $600 for smaller doors and up to $600 or more for custom or oversized installations.
The cost per square foot for frameless shower glass ranges from $35 to $70, while labor costs run $50 to $100 per hour. This guide explains all the factors that shape your total investment, so you can confidently plan your bathroom upgrade.
Cost by Size of Frameless Shower Door
The dimensions of your frameless shower door significantly impact the total cost. Larger doors require more glass, heavier hardware, and additional installation time. Standard sizes are less expensive, while custom sizing increases both material and labor costs due to specialized fabrication and fitting.
Single-panel doors are often the most affordable option, while double-panel and oversized doors fall on the higher end of the price spectrum. Minimum sizes start at 22 inches wide by 72 inches high, and custom doors can reach widths of 60 inches or more and heights up to 96 inches.
| Door Size (Width x Height) | Type | Average Cost | Cost Range |
|---|---|---|---|
| 22x72 in. | Single | $600 | $500–$900 |
| 36x72 in. | Single | $900 | $700–$1,200 |
| 48x72 in. | Double | $1,400 | $1,000–$1,800 |
| 60x80 in. | Oversized | $2,100 | $1,800–$2,800 |
| Custom (varied) | Custom | $2,800 | $2,000–$3,500 |
Frameless Shower Door Cost by Type
The type of frameless shower door you choose has a significant impact on both cost and function. Hinged doors are straightforward and cost-effective, while sliding, pivot, and bi-fold doors have more complex hardware and installation requirements, which raises prices. Neo-angle and fully custom enclosures offer maximum design flexibility but also come with higher costs for materials and labor.
Each type has its own benefits and drawbacks, from space-saving features to accessibility and maintenance considerations. Your choice will influence not only your budget but also the everyday usability of your shower.
| Door Type | Description | Average Cost | Pros | Cons |
|---|---|---|---|---|
| Hinged | Swings open on hinges | $800 | Simple, wide opening | Needs space to swing |
| Sliding | Doors glide along a track | $1,200 | Saves space, modern look | More hardware, track cleaning needed |
| Pivot | Rotates on a central pivot | $1,300 | Flexible opening direction | Complex install, higher cost |
| Bi-fold | Folds inward or outward | $1,200 | Great for tight spaces | More moving parts to maintain |
| Neo-angle | Fits corner showers with angled panels | $2,000 | Maximizes space, custom fit | Complex, premium price |
| Custom enclosure | Fully tailored to space | $2,800 | Maximum design flexibility | Highest cost, long lead time |
Framless Shower Door Cost by Location
Where you live affects the final cost of a frameless shower door. Urban areas with higher labor costs and material expenses tend to have higher prices than rural locations. The local cost of living, demand for skilled installers, and even delivery logistics can all change what you’ll pay. In remote regions, shipping large glass panels can add to your total cost.
Frameless Shower Door Installation Cost Factors
Several factors directly affect the total cost of a frameless shower door, including labor rates, permits, and hardware upgrades. Let’s break down what you can expect.
Labor
Frameless shower door installation is performed by glass installers, general contractors, or bathroom remodelers. Labor rates range from $50 to $100 per hour, with minimum service fees often applied for smaller jobs.
The complexity of your chosen door type, size, and layout can increase labor costs, especially for custom or oversized installations. In some regions, bundled pricing covers both materials and labor, while others may separate these charges.
Permits
Permits are not always required for frameless shower door installation, but some municipalities mandate them, especially for major bathroom remodels or when altering plumbing or electrical systems. Permit costs vary widely by location, often ranging from $50 to $200.
Your contractor often handles permits, but it’s important to clarify responsibilities upfront. Some areas also require final inspections, which may add to your overall costs.
Additional Features
Premium hardware finishes, such as brushed nickel, matte black, chrome, or brass, can add $50 to $300 to the cost of your project. Upgrading to thicker glass (three-eighths inch or one-half inch), low-iron (ultra-clear) glass, or frosted and patterned options increases material costs by $100 to $500.
Custom etching, designer handles, towel bars, or water-repellent coatings are optional upgrades, each adding a cost of anywhere from $30 to $200. For heavier or larger doors, special hinges or support bars may be required, which can further increase both material and labor costs.
Additional Cost Factors to Consider
Installation complexity has a direct impact on price. Angled layouts, alcoves, or out-of-plumb walls demand extra labor and possibly custom glass cuts. Accessibility challenges, such as tight bathrooms or installations on upper stories, increase time and handling fees. Site prep—including removing old doors, reinforcing walls, and waterproofing—may add $100 to $400.
The delivery of large glass panels can cost between $50 and $150, especially for custom orders. Some installers charge for post-installation cleanup and debris removal, while custom design consultations or inspections may add up to $300 to the project cost.
Additional Costs to Consider
Beyond installation, a few ongoing or incidental expenses can influence the total frameless shower door cost over time.
Warranties
Most manufacturers provide warranties for glass and hardware, covering defects for periods ranging from one to five years. Installers often offer workmanship warranties for one year. Extended or upgraded warranties can be purchased for $50 to $150, but always check what’s included—accidental breakage is rarely covered.
Maintenance
Proper cleaning is essential to prevent water spots and mineral buildup. Replacement seals, gaskets, or hardware can cost $10 to $50 per item. Professional maintenance, if needed, ranges from $75 to $200 per visit. To keep costs down, use gentle cleaners and squeegee after each use.
DIY Frameless Shower Door Installation vs. Hiring a Pro
While installing a frameless shower door yourself can save on labor, it comes with risks and challenges. DIYers spend $600 to $1,200 on materials, plus $50 to $200 on tools such as suction cups, levels, and safety gear.
The process requires skill in measuring, drilling, and sealing—mistakes can lead to leaks, glass breakage, or voided warranties. DIY installation may take a full day or more. For complex or custom doors, hiring a local glass door installer is the safer choice, ensuring watertight seals and proper alignment.
| Installation Method | Total Cost | Pros | Cons |
|---|---|---|---|
| DIY | $650–$1,400 | Saves on labor, flexible schedule | Risk of mistakes, safety concerns |
| Professional | $1,000–$2,500 | Expert finish, warranty, safety | Higher upfront cost |
Frameless Shower Door Replacement vs. Repair
Deciding between repairing or replacing a frameless shower door depends on the extent of the issue. Minor repairs—such as fixing leaks, replacing hardware, or sealing minor chips—cost between $50 and $300. If the glass is cracked, the hardware is outdated, or persistent leaks occur, replacement is necessary, with costs matching new installations.
Consider the 50% rule: if repair costs exceed half the price of a new door, replacement is the better investment. Other factors include the door’s age, warranty status, and whether parts are still available. A new door can enhance safety, function, and home value, while repairs are best for newer or lightly used installations.
Does a Frameless Shower Door Add Value to Your Home?
Installing a frameless shower door can offer a return on investment between 60% and 70%, making it a smart upgrade for modernizing a bathroom. These doors enhance visual appeal with their clean lines and open look, which attracts buyers seeking contemporary, low-maintenance spaces.
Compared to upgrades like new tile or vanities, frameless doors are a relatively affordable way to boost perceived value and functionality. Safety, efficiency, and universal design all contribute to increased home value, especially in competitive markets.
Tips to Reduce Frameless Shower Door Installation Costs
The following tips can help you keep your shower door installation costs within budget:
Obtain multiple quotes from local installers to ensure the best pricing.
Choose standard sizes and configurations to avoid custom fees.
Opt for basic hardware finishes instead of premium upgrades.
Handle old door removal or site prep yourself.
Schedule installation during off-peak seasons to receive discounts.
Bundle with other bathroom upgrades to save on labor.
Maintain your door properly to avoid costly repairs.
How Angi Gets Its Cost Data
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
Get our Angi-powered app
