How Much Does Hydro Jetting Cost? [2026 Data]

Having to keep your plumber on speed dial is no fun for any homeowner. If chronic sewer clogs are giving you issues, it might be time to call in the big guns. You’ll pay around $475 on average for hydro jetting costs, but it can cost as little as $100 or as much as $2,000. 

Hydro jetting shoots high-pressure water through your sewer line, breaking up clogs and restoring function to your pipes. Learn how much you’ll pay for hydro jetting services, plus additional factors to consider that might cost more now but prevent clogs in the future.

Hydro Jet Drain Cleaning Cost Factors

Several factors impact the overall cost of hydro jetting a sewer line, including the severity of the clog and sewer line accessibility. 

Calling in a plumber for a hydro jet drain cleaning service is a great solution to a clogged or slow-moving sewer line. Here are some cost factors to consider.

Extent of Clog

Even serious clogs stand no real match against hydro jet technology. Water is blasted through your pipes at 4,000 to 35,000 PSI, which will clear even the toughest of clogs.

That said, the more clogged it is, the longer it will take. Plumbers cost between $45 to $200 per hour, so even a few extra minutes can change the price tag of this service significantly. If you call in a local emergency plumber, it will raise the price more. 

Accessibility 

Sewer lines are typically located in the crawl space, basement, or garage. When they are difficult to reach, or in some cases sealed off or covered with obstacles, hydro jetting services will cost more because it will take longer for a professional to gain access.

The same $45 to $200 hourly fee for a plumber applies here, in addition to the hydro jetting drain cleaning costs. 

Sewer Line Length and Size 

The length of your sewer line (as well as the complexity of the pipe layout) will impact how long it takes your pro to complete the hydro jetting. The more time it takes to clear the clog, the higher your overall costs will be. 

Sewer Line Inspection

Cities and large suburbs in particular don’t tend to mess around with sewer lines connected to main lines, as serious damage could cause problems for hundreds of people.

In some areas, a professional camera inspection is required every time work is done on your sewer line. Sewer line inspections cost between $275 and $1,800.

While this isn’t what most would call inexpensive, the fines you’ll pay for not calling an inspector if you’re caught—or something’s still wrong with your sewer line and you don’t catch it—will be more expensive.

Additional Costs to Consider

With the basics covered, let’s look at some additional hydro jetting cost factors that could come into play when you get your sewer line unclogged.

Toilet Removal and Replacement

You wouldn’t be the first homeowner to have a clog or pipe damage serious enough to warrant a toilet replacement. On top of hydro jetting costs, toilet removal costs $50 to $200 on average, while installation costs $375.

Tree Root Removal

One of the most common sewer line problems comes from tree roots in your yard that grow around (or through) your sewer line.

High-pressure hydro jetting is so strong, in fact, that it may be able to remove the tree roots causing a blockage. Tree root removal from a sewer line typically costs between $100 and $600, on top of hydro jetting drain cleaning costs. (Check your home’s warranty to see if this is covered in your policy.)

Sewage Backup Cleanup

Many homes have a sewer backflow preventer, which, as its name implies, prevents all the things a sewer transports away from your home from getting back in if there’s an issue with your pipes.

A 120-square-foot bathroom could cost up to $3,000 to clean and repair after water damage. However, you shouldn’t clean up sewage on your own due to health and safety concerns. 

Sewer Cleanout Installation

Let’s say you survive a massive clog but fear it will happen again. In that case, you might consider installing a two-way sewer cleanout, which gives a professional easier access to your sewer main line. A two-way sewer cleanout installation costs about $2,700, in addition to hydro jetting costs.

Repairs or Replacement of Sewer Lines

Sewer line replacement and repair is calculated by the linear foot and can range from $60 to $250 per linear foot. The overall cost to repair a sewer line averages about $3,400.

Trenchless replacements and repairs are the easiest, as they require very little excavation and can be installed in just a few hours. A sewer line repair company near you can give you a quote.

Why You Should Hire a Hydro Jetting Pro

In most cases, hiring a local plumber or sewer cleaning company is the best way to tackle a hydro jetting project. Not only is this job potentially dangerous, but it can also cost more to buy the equipment and do the work yourself. Plus, if you make a mistake, you could damage your pipes and end up with a messier, more expensive problem on your hands.

Here’s why it’s ideal to hire a hydro jetting pro

Hydro jetting isn’t a simple task, so here’s why it’s better to hire a pro for the job: 

• Professionals know the proper techniques to handle a hydro jet, which can injure people if mishandled.

• Hydro jets cost thousands of dollars, but pros already have the right tools and equipment for the job.

• In many areas, only licensed professionals can legally work on sewer lines.

• Hydro jetting pros understand how to navigate delicate pipes and lines without damaging them.

• Professionals carry insurance, which can protect you in case anything goes wrong.

• Experts are faster and more efficient than DIYers.

If you want to DIY hydro jetting

Even though you shouldn’t do your own hydro jetting, there are ways you can prepare before a pro visits your home, including: 

• Clearing access to pipes, drains, toilets, and sewer cleanouts

• Making sure you have enough water for drinking or other uses (since the pro will need to shut off your water supply while they work)

• Removing or covering any items in the work area

• Letting the pro know about other plumbing issues you’ve had in the past

Ways to Save on Hydro Jetting Costs

Just because a drain is badly clogged doesn’t mean an expensive hydro jetting session is required. 

Here are two ways to save on hydro jetting drain cleaning costs:

• Handle the landscaping portion, if needed: Digging to access a sewer main line or ripping up parts of your yard might be necessary, such as when you install a two-way sewer cleanout. Do this portion yourself to save on hourly labor costs.

• Snake your drain instead: Snaking a sewer main line only costs $100–$400. If the clog is close enough, you may be able to do it yourself with a snaking tool.

• Good plumbing maintenance: Keep your drains clear. Avoid flushing large items and take care of small clogs before they turn into big ones. This is one of the most cost-effective ways to prevent major plumbing issues down the road.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.