The average cost to install shingle siding ranges from $10,200 to $18,700, with a national average of $13,600. Your total depends mostly on your home size and the shingle material you choose.
The size of your home and the shingle material will affect your total more than any other factor.
Cedar shingle siding is the most expensive option, costing up to twice as much to install as vinyl shingles.
Budget between $1,100 and $3,500 extra for old siding removal and permit costs, and check to see if these fees are included in your estimates.
Vinyl and fiber cement shingles are more affordable than cedar upfront, and they also require far less maintenance, so they’re less expensive over time, too.
Typically, shingle siding runs between $6 and $11 per square foot, including materials and labor. With costs for new shingle siding on a 2,000-square-foot home ranging between $7,200 and $24,200, the average homeowner will pay around $13,600 for a professional siding job with shingle-style planks. Most homeowners pay between $18,700 and $18,700, depending on home size, complexity, and material.
Shingle siding costs between $6 and $11 per square foot, with an average of $8, which means larger homes that need more siding material will cost more to re-side. Your siding contractor will base your price on the number of squares of siding you need, which doesn’t always scale directly with the square footage of your living space.
However, you can use the table below to get a more accurate price estimate based on how large of a living area you have without having to measure for siding.
Home Size (Sq. Ft.) | Average Cost | Cost Range |
---|---|---|
1,000 | $9,600 | $7,200–$13,200 |
1,500 | $11,600 | $8,700–$16,000 |
2,000 | $13,600 | $10,200–$18,700 |
2,500 | $15,600 | $11,700–$21,500 |
3,000 | $17,600 | $13,200–$24,200 |
The material used to create shingle siding will affect how much you'll pay per square foot. Cedar shingle siding is a traditional option but is one of the most expensive. Vinyl shingle siding is the most affordable, and fiber cement is a popular mid-range option.
Shingle Material | Cost (per Sq. Ft.) |
---|---|
Cedar | $7–$11 |
Vinyl | $6–$9 |
Fiber-Cement | $6–$10 |
Labor will account for between 50% and 70% of your shingle siding installation costs, as individual shingle siding takes longer to install and costs more labor than planks or boards. Labor costs scale with the local cost of living, so you’ll pay more in states where the cost of living is above-average, as well as in major metropolitan areas.
State | Average Cost |
---|---|
California | $19,700 |
Florida | $14,000 |
Georgia | $12,500 |
Illinois | $13,000 |
Michigan | $12,600 |
New York | $16,800 |
North Carolina | $13,300 |
Ohio | $12,900 |
Pennsylvania | $12,900 |
Texas | $12,600 |
Installing shingle siding mainly comes down to square footage and material options, but there are some other minor cost factors to consider to get the most accurate estimate possible.
Labor costs for installing shingle siding are often built into the quote based on the size and complexity of the home having new siding added. While rare, siding contractors who separate labor from siding materials when providing quotes normally charge between $30 and $100 per hour for labor.
Unless you’re installing shingle siding on new construction or directly over existing material, you’ll spend between $1,000 and $3,000 to remove your old siding before your professional can start, depending on the type of siding you have. Lightweight vinyl siding is easiest to remove and haul away, so it will cost closer to $1,000, while brick, stucco, and stone take longer and come with higher dumping fees, pushing this line item closer to $3,000.
Vinyl shingles usually come pre-finished in your selected color, but you may need other finishes for cedar or fiber cement board. Cedar shingles, in particular, will require stain or paint, and it’s a good idea to spray them with a fire-proofing application, especially if you live in an area prone to wildfires.
Application | Per Sq. Ft. | 2,000-sq-ft Home |
---|---|---|
Fireproof spray | $1–$3 | $3,400 |
Paint | $1–$3 | $3,400 |
Stain | $2–$5 | $5,100 |
While you can install siding yourself, we recommend contacting a pro. Improper installation can decrease the lifespan of the siding and cost more money in the long run.
If you live in an older home, the process of getting new siding might come with some surprise costs. If termite damage, leaks, and wood rot have occurred over the years, repairs may be necessary before you can install new siding. Termite damage repair costs can range from $250 to $37,500 based on how deep the damage goes. General repairs to carpentry framing due to age or general disrepair cost an average of $1,400. Contractors price these repairs based on the square footage, so your home's size is also a major factor in determining the final cost for these line items.
Most municipalities require permits for complete siding replacement, and you should budget between $150 and $500, depending on the fee structure your local building department uses. Your contractor should pull the necessary permits for you, but you’ll still have to foot the bill for the permitting fees.
When you decide to install new shingle siding can affect project costs. Fall is the best time to install siding because of the moderate temperature and lower risk of rain and extreme weather, but that also means it’s the busiest time for siding contractors. That means higher demand and, sometimes, higher prices, so aiming for the early spring can sometimes get you a better deal.
Installing your own shingle siding will save you between $6,700 and $9,500 on labor, so DIYing is an enticing option. However, it’s best to hire a local siding company for a professional installation for a few reasons.
First, putting up individual shingles is extremely time consuming, and unless you have experience with siding, it’s easy to make mistakes that detract from your curb appeal. More severe mistakes, like leaving gaps and failing to follow building code, can increase the risk of leaks and pest infestation, and the cost to repair siding errors, water damage, mold growth, and wood rot can easily end up costing you more than you’d save.
For the best results and to keep your home protected, hire a siding pro to get the job done.
Homeowners with existing siding that’s damaged, leaking, or detracting from curb appeal will need to decide if they should replace or repair their shingle siding. In all cases, repairs will be more affordable up front, but you should consider long-term costs and the value you get from each option before you decide.
Factor | Repair | Replace If |
---|---|---|
Cost | Repair cost is less than 30% of a full replacement | Repair cost is 50%+ of a full replacement |
Damage | Physical damage only | Leaks, pest infestation, mold growth, or water damage |
Age | Existing shingles are 20 years old or younger | Existing shingles are 30+ years old |
Replacing shingle siding can quickly get expensive, but there are some things you can do to reduce your costs to put towards another home project.
Select more affordable materials. Going with vinyl over cedar shingles can save an average of over $5,000. Vinyl also comes with fewer ongoing maintenance costs.
DIY siding removal. If you coordinate well with your contractor, you can save up to $3,000 by removing and hauling away your old siding yourself.
Do the painting or staining yourself. This is a time-consuming process, but you’ll save a few thousand dollars over having a professional handle the finishing work.
Think about longevity. Take care of your investment over time by scheduling regular siding maintenance and replacing broken shingles immediately.
Replacing siding on your home can increase its value, and most homeowners see a 70% return on investment (ROI). For shingle siding, that’s an average value bump of $9,500. You’ll see a higher ROI if you opt for fiber cement over vinyl, but your return could be lower if you choose cedar shingles in an area where wildfires or high humidity are problems.
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
There are a few options to choose from when it comes to shingle siding, including cedar shake, vinyl, and fiber cement. You can get these shingle siding materials in different colors, shapes, and sizes, giving you plenty of room to customize. You can also combine different siding materials and patterns with shingles for a more unique curb appeal.
Shingle siding is one of the most challenging sidings to install on a home. This is due to the offset installation technique that gives shingle siding its rustic, artisan look and to the fact that shingles go up in small, individual pieces that cover less square footage than a board or panel. Shingles also take more time and focus to install other common siding styles.
Siding pros typically charge by the square foot when providing estimates for siding projects. They’ll take the material cost and add in an estimated labor fee, and some contractors will include an additional upcharge to account for profit, waste, and unexpected issues. Another important price factor your pro will consider is the quality of your home’s current siding, which they’ll need to remove, and your home’s sheathing. If pros have to make any additional repairs to your home’s exterior, the added labor will also influence your final siding cost.
Fiber cement shingle siding is made from a blend of common ingredients, including cement, sand, water, and wood or cellulose fibers. The composition of the mixture varies depending on the manufacturer, however, with some makers opting to include special additives to improve longevity and resilience, and some include dyes and pigments to create custom colors that don’t require painting.
Vinyl is the most common shingle siding due to its rigid PVC design, longevity, affordability, and ease of installation. The next most popular types of shingle siding are fiber cement, which is in the mid-range for prices, and cedar shake, which is the most expensive. Consider the upfront cost, ongoing maintenance costs, and durability in your specific climate before deciding.