The average cost to connect to a public sewer line in Boston, MA, depends on the linear footage, piping material, local regulations, and more.
How Much Does Sewer Line Replacement Cost in Phoenix? [2026 Data]
Normal Range: $1,818 - $6,429
Sewer line replacement in Phoenix, AZ costs $4,123 on average, but it can range between $1,818 and $6,429, depending on pipe material.
How we get this data
Photo: Kristina Blokhin / Adobe Stock Photography
Photo: Kristina Blokhin / Adobe Stock Photography
Cost Insights
Sewer line replacement in Phoenix costs $45 to $280 per linear foot, installed, depending on material and project complexity.
PVC pipes are a good choice for Phoenix's alkaline desert soils, ranging from $50 to $120 per linear foot, installed.
Trenchless methods cost $60 to $200 per linear foot, while cured-in-place pipe (CIPP) lining ranges from $80 to $250 per linear foot.
Expect initial diagnostic service call fees of $100 to $250 to assess the scope of your project and what is required.
Standard sewer tap or connection fees cost $95 in Phoenix, plus an additional $150 for right-of-way permits if your project involves work on Maricopa County sidewalks or streets.
Sewer line replacement costs in Phoenix, Arizona, average $4,123, with most homeowners spending between $1,818 and $6,429 depending on material selection, pipe length, and excavation challenges. Phoenix soils vary from sandy loam to hard caliche, which can significantly impact excavation costs and equipment needs. Caliche requires special tools and can make excavation take longer and cost more than in other regions.
Sewer Line Replacement Cost Factors
Whether you're addressing signs of a clogged sewer line or planning preventive replacement, several factors influence sewer line replacement costs for homeowners in Phoenix, Arizona. The pipe material you select affects both upfront costs and long-term durability, with modern PVC and ABS options outperforming older materials in Phoenix's harsh conditions.
When considering higher trenchless sewer line piping costs versus traditional excavation, Phoenix homeowners must weigh the benefits of preserving mature desert landscaping against the upfront costs of sewer line replacement.
Pipe Material
The three most common pipes used for sewer lines are PVC (the most budget-friendly option), ABS (the mid-range option), and copper (the most expensive). Each has its own cost range and preferred use case. In rarer cases, cast iron is used as a sewer pipe material.
Here’s how sewer line replacement costs are affected by pipe material:
| Pipe Material | Average Cost per Linear Foot (Installed) | Pros | Cons |
|---|---|---|---|
| PVC | $45–$140 | Affordable, lightweight, excellent corrosion resistance in alkaline desert soils | Can become brittle under extreme temperature swings, vulnerable to tree root intrusion |
| ABS | $50–$150 | Better withstands Phoenix's extreme temperature fluctuations and soil movement | Can cost more than equivalent PVC piping, can degrade under prolonged UV exposure before installation |
| Copper | $140–$280 | High strength and durability, naturally antibacterial | More expensive, prone to corrosion over time in Phoenix's mineral-rich groundwater |
Pipe Length
The cost of running a new sewer pipe ranges from $50 to $250 per linear foot, with an average price of $150 per linear foot, which includes both materials and labor. Your sewer pipes extend from the house to a street-adjacent city hookup, and the distance depends on your specific neighborhood and property. The further your home is from the hookup, the longer the sewer pipes and the higher the costs.
Of course, the entire length of the pipe may not require replacement, so discuss options with your pro.
Type of Replacement
A partial replacement will be the most affordable option, with complete replacement and replacing burst pipes ranging from $60 to $250 per linear foot. Here’s how costs break down by type of sewer line replacement:
| Replacement Type | Average Cost per Linear Foot |
|---|---|
| Complete | $45–$120 |
| Partial | $50 |
| CIPP lining | $80–$250 |
| Burst pipes | $60–$200 |
Sewer Line Replacement Pro Costs
Professional sewer line replacement contractors in Phoenix understand factors specific to the Sonoran Desert environment. Phoenix's extreme heat and caliche soil contribute to higher repair costs, as the caliche layer requires specialized equipment to excavate, which increases labor costs.
Labor
Phoenix sewer line replacement pros most often provide per-project or per-linear-foot bids that bundle labor, equipment, and restoration into a single quote. The average range is $45 to $200 per linear foot, which is equivalent to $45 to $200 per hour. Expect service call fees of $100 to $250 to cover initial diagnostics, especially when traveling across the sprawling Valley metropolitan area. Experienced pros can answer any sewer questions you may have before beginning work.
Permits
Permits are required in Phoenix when replacing your sewer line from your house to the main. The standard sewer tap or connection fee is $95. If the project is in the right-of-way of Maricopa County sidewalks or streets, you'll need to get a permit from the Maricopa County Department of Transportation (MCDOT), which costs $150 for residential projects. Additional City of Phoenix plumbing permit costs are calculated based on the project's valuation, with fees determined by the total value of materials, labor, overhead, and profit. Confirm your specific permit or inspection fees with the Phoenix Permit Center or ask your contractor.
Desert Soil
Caliche is a calcium-carbonate cemented layer common in southern Arizona. This desert soil composition can make excavation difficult in some areas and increase machine time. Geotechnical guidance and specialized tools are required to break through caliche effectively, resulting in higher costs compared to projects in regions with softer soils.
Conversely, Phoenix has no deep frost line, so winter digging is easier than in cold climates. This can reduce the frost-related premium seen in northern cities. Similarly, Phoenix homes typically need less dewatering than high-water-table cities for sewer line work, though certain neighborhoods with irrigation or near wash areas may still require it.
Landscaping Protection
Protecting valuable desert landscaping and xeriscaping during sewer line replacement adds costs but prevents thousands in landscape restoration. Many Phoenix homeowners invest in tree root barriers during replacement projects to protect new pipes from future intrusion, adding $3 to $8 per linear foot but providing long-term protection in the water-scarce desert environment.
Does Sewer Line Replacement Increase Home Value?
Understanding how often you should clean your sewer drain helps prevent emergencies. The reality is that sewer line replacement functions as vital infrastructure maintenance rather than a value-added enhancement when it comes time to sell your Phoenix home. The benefit of replacing a failed or obviously damaged lateral is that it can prevent sale delays and possible appraisal issues.
The average return on investment (ROI) for a professional sewer line replacement is 35% to 50% if the work is documented and backed by a warranty. For properties in established Phoenix neighborhoods like Encanto and Arcadia, with housing stock from the 1940s through 1970s, a recent sewer line replacement demonstrates proactive maintenance and eliminates a major inspection red flag.
Sewer lines last around 40 years, so if you have an older house, this could otherwise be a serious concern for potential buyers. Replacing your aging system eliminates these risks and provides peace of mind to buyers concerned about hidden infrastructure issues.
How Angi Gets Its Cost Data
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
The homeowners guide to septic tank services
From average costs to expert advice, get all the answers you need to get your job done.
How much does it cost to install a septic system in Boston? Explore cost factors, add-ons, and how you can save money on this home system.
Concrete is one of the longest-lasting septic tank materials. Find out concrete septic tank prices for your wastewater management project.
Not all cesspool messes need a total clean-out. Learn how to clean a cesspool so you know whether you can tackle it yourself and when to call in a pro.
A mound septic system is similar to a traditional system, except the drain field is built into a mound and not hidden underneath your yard.
Your lot might require an alternative septic system based on location and soil conditions. Learn all about alternative septic systems and their costs.