Pressure washing your fence can restore its appearance and keep your home looking great. Learn how much it costs based on factors like square footage and material.
How Much Does It Cost to Pressure Wash a House in Columbus, Ohio? [2026 Data]
Normal Range: $187 - $353
The average cost to pressure wash a house in Columbus, OH, is $259, but most homeowners pay between $187 and $353. Your pro will factor in the project type and surface area for a complete estimate.
How we get this data
Cost Insights
It’s important to consider your home’s square footage when calculating how much it costs to pressure wash a house in Columbus.
The average cost of pressure washing a home in Ohio’s capital runs between $0.08 and $0.42 per square foot.
It costs $167 to $836 to pressure wash a 2,000-square-foot house in Columbus.
If you only need to pressure wash a small area (rather than your entire home), you won’t pay quite as much.
For example, pressure washing a driveway ranges from $84 to $209, while a fence costs $125 to $251.
In Ohio’s capital, residential pressure washing costs between $187 and $353, with the average project costing $259. To figure out how much it costs to pressure wash your Columbus home, you’ll have to factor in your home’s size, material, and a few other variables.
Pressure Washing Cost Factors
The size of your house directly affects the price of pressure washing in Columbus, OH, but there are other cost factors to consider, as well.
Cost to Pressure Wash a House per Square Foot
Pressure washing costs $0.08 to $0.42 per square foot, depending on what part of your property you’re cleaning. Flat, easily accessible surfaces like driveways and patios take less effort and therefore cost less.
Note that pressure washing only a small area means that a technician will spend very little time at your home, but they still have to pay for gas, insurance, and all other overhead costs. For this reason, pressure washing costs less per square foot when you give a professional more to do. So, take some time to look around your property and think about everything that could use some spiffing up.
Here’s how much it might cost to pressure wash a 1,500 square foot house, 2,000 square foot house, or 2,500 square foot house:
| Home Size (Square Feet) | Average Cost Range in Columbus, OH |
|---|---|
| 1,500 | $125–$627 |
| 2,000 | $167–$836 |
| 2,500 | $209–$1,044 |
Cost to Pressure Wash by Project Type
You might not always intend to pressure wash your actual house. Several other areas on your property could benefit from a thorough pressure wash job, including your driveway, patio, and fence.
Here’s the average pressure washing cost for different parts of your property:
| Pressure Washing Project | Average Cost Range in Columbus, OH |
|---|---|
| Driveway | $84–$209 |
| Patio | $84–$167 |
| Fence | $125–$251 |
| Siding | $125–$1,170 |
Angi Tip
Pressure washing can be dangerous and damage your property if not done correctly. We highly recommend hiring a pro to ensure the job is completed safely and correctly.
Pressure Washing Cost by Number of Stories
The cost to pressure wash your home also depends on the number of stories. If your home is two or three stories, the professional will need a ladder, scissor lift, or bucket truck to complete your project—any of which can increase your costs.
Here’s how much you’ll pay to pressure wash your home based on the number of stories:
| Number of Stories | Average Pressure Washing Cost in Columbus, OH |
|---|---|
| One | $125–$836 |
| Two | $334–$1,170 |
| Three | $585–$1,504 |
Cost to Pressure Wash by Material
Your house’s materials can also influence the overall cost of pressure washing. This is because certain materials require special cleaning techniques, which may take longer (and cost more in labor).
Here’s how pressure washing costs are influenced by house material:
| House Material | Average Cost per Square Foot in Columbus, OH |
|---|---|
| Brick | $0.08–$0.33 |
| Stucco | $0.25–$0.42 |
| Wood | $0.25–$0.46 |
| Vinyl | $0.17–$0.42 |
Pressure Washing vs. Power Washing Cost
Though pressure washing and power washing are often used interchangeably, they differ in method and cost. The table below outlines the key differences:
| Pressure Washing | Power Washing |
|---|---|
| Less expensive | More expensive |
| Uses cold water | Uses hot water |
| Best for fences and decks that don’t have stubborn stains | Best for walkways and patios that have tougher dirt and grime |
| Lower risk of damaging surfaces | Potential risk of damage or burns from hot water |
How Often Should You Pressure Wash Your House?
You should pressure wash your home once per year, and the best time to pressure wash is between March and November in most areas. These months rarely have temperatures that dip too low, so the risks of freezing water and cold temps damaging the machines is low. That said, demand is higher in the spring and summer, so you could experience longer wait times for a professional to come (and possibly higher costs).
Here’s how often you should pressure wash different areas of your home:
| Area of Home | Best Time to Pressure Wash | Reason |
|---|---|---|
| Siding | Spring or fall | Mild temperatures, less risk of mold and mildew buildup |
| Driveway | Spring or fall | After winter snow or fall leaves to remove debris and grime |
| Deck or patio | Late spring or end of summer | Prepare outdoor spaces for summer use and clean up after peak season |
Pressure Washing Pro Costs
Aside from the above, there are a couple of other costs to think about when hiring pressure washers in Columbus, including labor and sales tax.
Labor
You’ll pay between $42 and $125 per hour to hire a pressure washing pro in Columbus, OH. Pressure washing quotes often include the cost of labor, but if your pro’s pricing is unclear or confusing, ask them to walk you through it before signing the contract.
Sales Tax
In Ohio, building maintenance services (including pressure and power washing) are taxable. Since Columbus’s sales tax rate is 8%, that would add an extra $24 to a $300 pressure washing job.
Does Pressure Washing Your House Increase Home Value?
Pressure washing helps your house look more polished and put together—which is important when you’re trying to sell. For an average cost of $259, pressure washing offers many benefits, including improving your home’s curb appeal and potentially netting you a higher sale price. Plus, if you’re selling after a long Ohio winter, your home might have an accumulation of dirt, mold, and mildew. Pressure washing can get rid of the mess and create a better first impression with buyers.
How Angi Gets Its Cost Data
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
The homeowners guide to pressure washing services
From average costs to expert advice, get all the answers you need to get your job done.
The cost to pressure wash a patio depends on the size of the surface and the type of patio you have, as well as whether you DIY or hire a pressure washing pro.
The cost to pressure wash a deck depends on its size, condition, material, and whether you DIY the job. Help set your budget with this cost guide.
To keep your pressure washing running whenever you need it, make sure to follow this pressure washer maintenance checklist.
What is pressure washing? It’s a quick way to get rid of built-up stains—but only under the right circumstances. Here’s when (and when not) to pressure wash.
Learn the various ways to remove small and large areas of paint from concrete, including soda blasting, paint strippers, power washing, and more.