How Much Does It Cost to Pressure Wash a House in Washington, D.C.? [2026 Data]

Normal Range: $234 - $470

The average cost to pressure wash a house in Washington, D.C., is $348, but most homeowners pay between $234 and $470. Your pro will factor in the project type and surface area for a complete estimate.

How we get this data
A professional pressure washes the exterior siding and windows of a house surrounded by neatly trimmed bushes and trees.
A professional pressure washes the exterior siding and windows of a house surrounded by neatly trimmed bushes and trees.
Cost Insights
  • Your home’s size directly affects how much it costs to pressure wash a house in Washington, D.C.

  • On average, you’ll pay $0.11 to $0.56 per square foot for professional pressure washing in the nation’s capital.

  • For a 2,000-square-foot property, you can expect to spend between $225 and $1,123.

  • Your house material also factors into your overall pressure washing costs.

  • For example, brick (the most common material in Washington, D.C.) costs $0.11 to $0.45 per square foot to pressure wash.

In Washington, D.C., it costs an average of $348 to pressure wash a house, with most projects running between $234 and $470. There are a few key variables that impact how much it costs to pressure wash a house in Washington, D.C., including your home’s square footage and material. Let’s look at how those factors influence your pressure washing costs in the nation’s capital.

Pressure Washing Cost Factors 

From home size to house material, here are the cost factors to consider when budgeting for pressure washing in Washington, D.C.

Cost to Pressure Wash a House per Square Foot

Pressure washing costs $0.11 to $0.56 per square foot, depending on what part of your property you’re cleaning. Flat, easily accessible surfaces like driveways and patios take less effort and therefore cost less.

Note that pressure washing only a small area means that a technician will spend very little time at your home, but they still have to pay for gas, insurance, and all other overhead costs. For this reason, pressure washing costs less per square foot when you give a professional more to do. So, take some time to look around your property and think about everything that could use some spiffing up.

Here’s how much it might cost to pressure wash a 1,500 square foot house, 2,000 square foot house, or 2,500 square foot house:

Home Size (Square Feet)Average Cost Range in Washington, D.C.
1,500$168–$842
2,000$225–$1,123
2,500$281–$1,403

Cost to Pressure Wash by Project Type

You might not always intend to pressure wash your actual house. Several other areas on your property could benefit from a thorough pressure wash job, including your driveway, patio, and fence.

Here’s the average pressure washing cost for different parts of your property:

Pressure Washing ProjectAverage Cost Range in Washington, D.C.
Driveway$112–$281
Patio$112–$225
Fence$168–$337
Siding$168–$1,572
Angi Tip

Pressure washing can be dangerous and damage your property if not done correctly. We highly recommend hiring a pro to ensure the job is completed safely and correctly.

Ryan Noonan
Content Editor, Angi

Pressure Washing Cost by Number of Stories

The cost to pressure wash your home also depends on the number of stories. If your home is two or three stories, the professional will need a ladder, scissor lift, or bucket truck to complete your project—any of which can increase your costs.

Here’s how much you’ll pay to pressure wash your home based on the number of stories:

Number of StoriesAverage Pressure Washing Cost in Washington, D.C.
One$168–$1,123
Two$449–$1,572
Three$786–$2,021

Cost to Pressure Wash by Material

House pressure wash cost scale compared by material, including brick, vinyl, stucco, and wood

Your house’s materials can also influence the overall cost of pressure washing. This is because certain materials require special cleaning techniques, which may take longer (and cost more in labor).

Here’s how pressure washing costs are influenced by house material:

House Material Average Cost per Square Foot in Washington, D.C.
Brick$0.11–$0.45
Stucco$0.34–$0.56
Wood$0.34–$0.62
Vinyl$0.22–$0.56

Pressure Washing vs. Power Washing Cost

Though pressure washing and power washing are often used interchangeably, they differ in method and cost. The table below outlines the key differences:

Pressure Washing Power Washing
Less expensiveMore expensive
Uses cold waterUses hot water
Best for fences and decks that don’t have stubborn stainsBest for walkways and patios that have tougher dirt and grime
Lower risk of damaging surfacesPotential risk of damage or burns from hot water

How Often Should You Pressure Wash Your House?

You should pressure wash your home once per year, and the best time to pressure wash is between March and November in most areas. These months rarely have temperatures that dip too low, so the risks of freezing water and cold temps damaging the machines is low. That said, demand is higher in the spring and summer, so you could experience longer wait times for a professional to come (and possibly higher costs).

Here’s how often you should pressure wash different areas of your home: 

Area of HomeBest Time to Pressure WashReason
SidingSpring or fallMild temperatures, less risk of mold and mildew buildup
DrivewaySpring or fallAfter winter snow or fall leaves to remove debris and grime
Deck or patioLate spring or end of summerPrepare outdoor spaces for summer use and clean up after peak season

Pressure Washing Pro Costs

Before hiring a pro to pressure wash your house in Washington, D.C., there are a couple of extra costs to keep in mind. Let’s walk through them.

Licensing

If done incorrectly, pressure washing can damage siding, roofing, and other parts of your home, which is why it’s important to hire a licensed, insured, and bonded company for the job. In Washington, D.C., pressure washing companies must have a Basic Business License (BBL) to operate legally. On average, pressure washing pros in Washington, D.C. charge between $56 and $168 per hour.

Sales Tax

It might not increase your costs significantly, but it’s still worth considering sales tax when planning your pressure washing budget. Currently, the sales tax rate in Washington, D.C., is 6%, so if your project subtotal is $350, you’ll owe $21 in sales tax.

Does Pressure Washing Your House Increase Home Value?

If you’re planning to sell your home, pressure washing your house is a simple way to boost its curb appeal and make a good first impression with potential buyers. Plus, when your house looks clean and tidy on the outside, it can give buyers the confidence that you’ve maintained the rest of your property, too, which could make it easier to sell. That’s particularly valuable in Washington, D.C., where the real estate market can get competitive. 

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.

Need professional help with your project?
Get quotes from top-rated pros.

The homeowners guide to pressure washing services

From average costs to expert advice, get all the answers you need to get your job done.