
Inspections are an essential part of furnace maintenance. Prevent inconvenient breakdowns by budgeting for furnace inspection costs and repairs.
In Columbus, OH, a new furnace costs $4,456 on average. Total costs range from $2,441 to $6,683, depending on the size, furnace type, and efficiency rating.
On average, a new furnace costs $4,456 in Columbus, OH.
The average Columbus home needs a furnace capacity of 56,700–113,400 BTUs.
Natural gas is the most common type of furnace in Columbus.
Adding a smart thermostat could save you up to 12% on heating costs.
A mechanical permit costs $130–$250 for single-family homes.
A new furnace costs around $4,456 in Columbus, Ohio, but the project total may range from around $2,441 to $6,683, depending on your home’s square footage, the type of furnace, the efficiency rating, and add-ons like updated ductwork or a smart thermostat. Ohio is known for its unpredictable weather, so while a furnace is essential for cold winters in the state capital, you may find yourself turning up the heat well into spring or early in fall, too.
Installing a furnace is a complex project with many factors that can influence the final price.
The size of your home and the size of your furnace go hand in hand. Furnace size, or capacity, is measured in British thermal units (BTUs), which account for how much energy the furnace needs to raise the temperature of 1 pound of water by 1 degree Fahrenheit.
For the average Columbus home, you’d need about 56,700 to 113,400 BTUs. Here’s what you can expect to spend based on the square footage of your house.
Home Size in Square Feet | Furnace Size in BTUs | Average Cost Rage |
---|---|---|
1,200 | 36,000–72,000 | $1,000–$4,450 |
1,500 | 45,000–90,000 | $2,040–$5,570 |
1,800 | 56,700–113,400 | $2,440–$6,680 |
2,000 | 60,000–120,000 | $2,720–$6,850 |
2,250 | 67,500–135,000 | $3,060–$7,000 |
2,500 | 75,000–150,000 | $3,400–$7,350 |
3,000 | 90,000–180,000 | $4,080–$8,830 |
3,500 | 105,000–210,000 | $4,760–$10,300 |
The type of furnace you choose will make a big impact on the project cost. In Columbus, natural gas is the most common and provides reliable heating in the city’s cold winters. However, many homes also use electric furnaces, and homes on the outskirts of town may have propane tanks or wood-burning stoves. However, most oil furnaces in Columbus are replaced with gas by this point.
Furnace Type | Average Cost Range | Pro | Con |
---|---|---|---|
Natural gas | $3,800–$10,000 | Lower energy costs | More maintenance |
Electric | $2,000–$7,000 | Energy-efficient | Higher energy bills |
Propane | $3,700–$10,300 | Quick heating | Less energy-efficient |
Oil | $6,750–$10,000 | Long lifespan | More expensive |
Wood | $1,500–$4,000 | Lower energy costs | Requires space to store wood |
Consider investing in a furnace with a higher fuel utilization efficiency (AFUE) rating, as this means the furnace is more energy-efficient and will save you money on heating costs over time. Here are the average costs you can expect based on efficiency rating.
Performance | AFUE Rating | Average Cost Range |
---|---|---|
High-efficiency | 96% or higher | $6,680–$10,300 |
Mid-efficiency | 90%–95% | $2,440–$6,680 |
Low-efficiency | 80%–89% | $1,000–$2,440 |
The cost to replace ducts is around $260 to $1,120. Sealed, well-functioning ducts are essential for an efficient heating system, so contact an HVAC pro to check your ducts and determine if they need any repairs or replacement.
Installing a smart thermostat costs around $130 to $500, but it can save you 10% to 12% on heating costs, plus 15% on cooling costs. When combined with an energy-efficient furnace, a smart thermostat can help your household save more money compared to a standard furnace and traditional thermostat.
In Columbus, labor costs account for about 10% to 20% of the total price to install a furnace. HVAC pros will include their labor costs in the project quote, along with costs for permits and inspections.
Columbus residents need a permit and inspection from the city’s Department of Building and Zoning Services for installing a new furnace. Your local furnace pro can handle the process and will include the $130 to $250 mechanical permit cost in your contract.
Installing a new furnace, particularly an energy-efficient one, can increase the value of your home in Columbus by about 5% to 10%. A new, professionally installed furnace gives buyers peace of mind that they’ll have reliable heating for many years.
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
From average costs to expert advice, get all the answers you need to get your job done.
Inspections are an essential part of furnace maintenance. Prevent inconvenient breakdowns by budgeting for furnace inspection costs and repairs.
Factors such as labor and parts impact the final price of repairing a window AC unit. Learn all of the costs associated with window air conditioner repair.
New AC compressor costs depend on factors like the compressor’s size and type. Read on to learn more about ac compressor cost factors, in this guide.
Discover wood pellet cost estimates, including price per ton, bag, and key factors that impact your total heating expenses.
Discover the average wall heater installation cost, key price factors, and expert tips to help you budget and save on your next home heating project.
Understanding how to calculate CFM in your home can help you determine how much airflow you need to regulate temperature and maximize HVAC efficiency.