How Much Does Garage Door Spring Replacement Cost? [2026 Data]

If your garage door isn't opening or closing properly, you may need to replace the door’s springs. Garage door spring replacement costs $250 on average, with prices often ranging from $150 to $350 or more. A reliable garage door protects your home from security threats and the elements while also making daily life more convenient. However, it must work properly to be helpful. Read on to learn about all the factors that impact the cost of replacing your garage door springs.

What Factors Influence the Cost to Replace Garage Door Springs?

A few factors impact the cost to replace a garage door spring, including:

Spring Type

Garage doors operate with either extension or torsion springs. While extension springs might be cheaper, torsion springs have longer lifespans and are generally considered safer. It’s possible to switch from one type of spring to another, but switching means a professional has to remove the old spring parts to install an entirely new system. And that, of course, increases your total garage door spring replacement cost—it’s roughly five times as expensive to do a garage door spring conversion.

Type of Garage Door

Garage door springs are integral to how most garage doors work. Garage door spring replacement costs can depend on the type of garage door: sectional, tilt-up, or roll-up.

Sectional garage doors are the most common type of garage door in the United States. The horizontal panels that make up the garage door are connected via hinges, and one by one, the panels roll up and inside a vertical track.

Tilt-up garage doors, also called one-piece garage doors, do exactly as their name implies: You tilt up the door and move it back along its tracks. Roll-up garage doors are common in commercial settings; the narrow steel panels coil up just above the opening.

Tilt-up garage doors use extension springs. Roll-up garage doors use torsion springs, which are more expensive to replace. Both extension and torsion springs are common on sectional doors.

Number of Doors

You’ll pay between $150 and $350 for a single garage door. Costs could potentially run as high as $500 if you have to replace springs for several doors or have to make related repairs. When one door garage spring fails, it’s better to replace both springs at the same time to maintain the door's balance. Plus, a contractor will likely give you a good deal if you replace both during the same visit.

For example, your garage door repair tech must make a trip to your home, whether replacing springs for a single door or three doors. Replacing springs on multiple garage doors can minimize labor costs by reducing trip time. However, the material price will increase by the cost of additional springs per door. 

Double-door springs can cost an extra $15 to $30 per spring compared to a single-door.

Accessibility

If a pro has a hard time accessing the garage, it could increase your labor costs. Difficulty accessing the garage or the spring itself means more time tacked onto the labor portion of the contractor’s bill.

Labor

For residential garage doors, spring replacement runs between $75 to $150, while commercial-grade springs can cost between $150 and $300 to replace. Due to the dangers of DIY work on garage door springs, contacting a pro who fixes garage doors is crucial for this job. 

Location

In some cases, your location might affect the cost to replace a garage door spring. Labor rates tend to be higher in areas with a high cost of living, like large cities, compared to areas with a lower cost of living, such as rural and suburban towns. But if you live in a rural area and your pro needs to make a long trip to get to your house, they might charge more than if you lived closer. 

Urgency

Emergencies happen. If time is of the essence, you should call an emergency garage door repair contractor near you, though their services tend to cost more. If a spring is broken, the garage door is stuck for an unknown reason, or you're unsure of the problem with your garage door, you should avoid potential injury by not opening the door manually. 

Additional Factors to Consider

A few additional factors can impact how much you will spend to replace your garage door springs.

Additional Garage Repairs

Your garage door relies on several important components to operate safely and smoothly. Since you’re already paying a contractor their base fee to show up and make the repairs, it’s worth asking them to take a closer look at your entire garage door system and ensure everything else is running as it should.

They might notice issues beyond the spring(s) that need to be replaced. Other garage door components that might need repairs over time include:

• Cables

• Rollers

• Tracks

• Hinges

• Weatherstripping

• Sensors

• Bottom seal

• Garage door opener

Garage Door Spring Maintenance

Your garage door springs require regular maintenance over time to ensure they operate without issue for their entire lifetime. Two to three times a year, you should lubricate the garage door springs (and other key garage components).

While you can hire a garage door contractor for this service, it’s also viable as a DIY project: here’s how to lubricate your garage door on your own. Your only cost will be the lithium- or silicone-based lubricant. Just remember to clean the springs before you lube them.

You should also inspect your garage door springs for imbalance and check their tension every few months.

Quality of the Spring

The cost of the garage door springs themselves can vary depending on their quality. Some brands manufacture budget springs, while others charge more for springs that are of a higher quality. A middle-of-the-road spring gets you the best of both worlds: decent quality at a fair price.

Spring Strength

Heavier garage doors require larger (and stronger) springs. The typical seven-foot-tall garage door needs 25-inch springs; eight-foot-tall garage doors require 27-inch springs. The price difference here is minimal (maybe $5 to $10 per spring or set of springs, depending on where you buy them), but larger springs cost more.

Why You Should Hire a Garage Door Spring Replacement Pro

Hiring a local garage door spring replacement pro may cost more upfront, but it ensures the job is done safely and correctly. Garage door springs are under extreme tension, and improper handling can cause serious injury or damage. Professionals have the tools, training, and experience to replace springs accurately, restoring smooth operation and extending the life of your garage door system.

Here’s why it’s ideal to hire a garage door spring replacement pro

Garage door spring replacement is a high-risk, specialized project that requires technical knowledge and strict safety precautions. Here are some of the top reasons to work with a pro:

• Technicians can correctly identify the spring type (torsion or extension), size, and weight rating your door requires.

• Pros use professional-grade tools and safety equipment designed specifically for high-tension springs.

• Working with a pro ensures proper balance and alignment, preventing premature wear on the opener and tracks.

• Professionals can spot related issues—like worn cables, bearings, or rollers—before they cause bigger problems.

• Many companies offer warranties on parts and labor, giving you peace of mind and long-term value.

If you want to DIY prep for a garage door spring replacement

You shouldn’t attempt to replace a garage door spring yourself, but a little preparation can help reduce service time and costs:

• Clear vehicles, storage items, and clutter away from the garage door and work area.

• Make a note of any symptoms (loud bangs, uneven door movement, difficulty opening) to share with the technician.

• Ensure the technician has clear access to the garage door, opener, and electrical outlet.

• Secure pets and keep children away from the garage during the service visit.

Signs Garage Door Springs Need to Be Replaced 

If your garage door exhibits any of the following behaviors, it’s likely time for a garage door tuneup or spring replacement.

Garage Door Issues

Common signs that you need new garage door springs include:

• The door isn't hanging straight.

• The motor is working, but the door is stuck.

• The door lowers faster than usual.

• The door won't stay open on its own.

• You notice visible gaps in the springs.

• The garage door makes a lot of noise.

• You notice loose or broken cables.

Springs Are Starting to Rust

Garage door springs can rust when exposed to moisture, so it's a particular concern for homeowners in coastal regions. More than unsightly, rust can degrade the spring over time, rendering it useless. To prevent rust, lightly lubricate the springs each year using a lithium-based lubricant. Homeowners in coastal regions might need to lubricate them several times per year due to moisture in the air. 

Screeching Noises

If you hear screeching noises, it's possible that the springs are too tight or too loose. However, it's more likely due to worn-out or frayed cables. Bent or damaged tracks can also cause the garage door to screech. 

Spring Replacement vs. Garage Door Replacement

When your garage door suddenly won’t open or close, you might feel that impending sense of dread because you have to buy a new garage door.

And who could blame you? It’s a lot of money. Replacing a garage door costs $750 to $1,700, while a garage door spring replacement costs an average of just $250.

Luckily, you may only need to replace the garage door springs. Call a garage door technician to check out the issue. If the only problem is the garage door springs, you’re in the clear. But if the pro reports issues with multiple components, such as the cables, pulleys, tracks, or the garage door itself, it’s probably time to fully replace the garage door.

In the long run, it’s likely more affordable than taking a piecemeal approach and repairing each part of the broken garage door as it fails.

Tips to Reduce the Cost of Replacing Garage Door Springs 

There are several ways to potentially reduce the cost of replacing a garage door spring, including:

• Getting estimates from multiple pros to find the best price.

• Asking companies about any seasonal promotions or discounts.

• Regularly maintaining and lubricating your garage door to prevent the need for repairs.

• Buying the springs yourself.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.