
Find out the average geothermal heating and cooling installation cost in New York, NY. Learn what you can expect to pay for this energy-efficient upgrade.
Heating and air conditioning service costs depend on your project and location. Check with a local pro for your specific job.
The size of the boiler you need, the fuel type, and the efficiency will affect your costs more than any other factor.
The average home in New York City is just over 1,300 square feet and needs a boiler with a BTU rating of between 55,000 and 65,000.
Make sure to have a professional size your boiler appropriately for your home since there are many factors that can affect the ideal capacity.
Oil boilers are the most common type in NYC, but if you already have gas service, a gas boiler can save you close to $1,000.
Boiler replacement costs in New York City average $5,427, and most projects total between $3,524 and $7,343. Your cost will depend mostly on the fuel type, boiler capacity, and the efficiency rating. Boiler size is related to home square footage, but you should always have a professional size your system and determine your total boiler replacement costs.
Homeowners in New York City, New York, can pay as little as $900 for boiler replacement, but your total can climb as high as $11,000. There are a few key factors to consider that will have an impact on your pricing.
Sizing your boiler for your home is crucial to ensure you have enough heating capacity to get through the relatively cold winters and that your boiler works efficiently. A good rule of thumb in New York City is to aim for 45 British Thermal Units (BTU) for every square foot of living space, which is based on the climate in the area. The average home in NYC is 1,300 square feet, which means most residents will need between 55,000 and 65,000 BTUs.
BTU, or British Thermal Unit, is a unit that measures how much energy it takes to raise the temperature of one pound of water by one degree Fahrenheit. For heat pumps, each ton of capacity is equivalent to roughly 12,000 BTUs.
You can estimate the cost of your boiler by your home’s square footage and boiler capacity using the table below. However, call an HVAC pro in New York City for the most accurate estimate.
| Home Size (Sq. Ft.) | BTUs Needed | Average Cost |
|---|---|---|
| 1,000 | 40,000–50,000 | $4,000–$6,500 |
| 1,300 | 55,000–65,000 | $5,000–$6,800 |
| 1,500 | 65,000–75,000 | 1,800 |
| 1,800 | 75,000–85,000 | $5,600–$7,500 |
| 2,000 | 85,000–95,000 | $5,900–$8,000 |
The most common fuel used for boilers in New York City is oil, with natural gas being a distant second. The fuel type you choose will have a major impact on both your ongoing costs and how much you pay for a new boiler.
| Fuel Type | Cost Range |
|---|---|
| Electric | $1,600–$7,400 |
| Natural gas | $3,700–$8,300 |
| Oil | $4,400–$8,300 |
| Propane | $2,600–$6,900 |
| Wood | $6,400–$14,700 |
Oil boiler: Oil burns hotter than gas, so oil boilers provide more heat and are better in colder climates. However, oil boilers require more maintenance than gas options, so keep things like long-term maintenance costs in mind before buying. Most boilers in New York City use oil as a fuel source.
Gas and propane boiler: Propane and natural gas are also common options for heating homes, but you’ll need gas lines running to your boiler. In addition to the unit price, installation costs $1,000 to $3,000 and may require new exhaust lines, drains, and fuel lines.
Electric: Electric boilers are highly efficient and don't require some of the components that gas and oil boilers need, like exhaust vents. They take a long time to heat up, but it’s sometimes possible to get through the winter with one in a mild climate like New York.
Wood: Large, outdoor, wood-fueled boilers are good options for rural areas that have easy access to wood, so they’re virtually non-existent in NYC.
Boilers are broken out by fuel type, but they can also vary in other ways—like their system types. Most homes in New York City use standard boilers, which cost between $2,800 and $5,500.
| Boiler Type | Cost Range |
|---|---|
| Combination | $2,400–$6,500 |
| High-efficiency | $5,500–$10,100 |
| Standard | $2,000–$6,500 |
| System | $2,800–$5,500 |
Standard or conventional boilers: These boilers work by quickly heating water in pipes and sending it to your taps. Standard units are one of the most popular choices for homeowners in large homes and those with floor heating systems.
Combination boilers: Combination boilers are popular because they’ll give you access to hot water quickly. However, the supply tends to be limited due to the lack of a storage tank.
System boilers: These work by keeping high-pressure hot water in a sealed cylinder, where it can be sent to multiple taps within your home simultaneously.
High-efficiency boilers: High-efficiency boilers are up to 98% efficient, which accounts for thousands of dollars in savings over the boiler's life. Standard boilers are around 80% efficient, making them ideal for cold climates.

The capacity of your boiler (in BTUs) depends on your region and climate. Warmer climates make it much easier to heat water, even for larger houses, so fewer BTUs are required. You can estimate your necessary BTUs by finding out which climate zone you live in. New York City falls in climate zone 3, and an average of 45 BTUs per square foot of living space is a good rule of thumb for sizing your system in the area.
When it’s time to replace your boiler, 50% of your total will go toward labor alone, which means an average of $2,700 in New York City. This is higher than you’d pay in most cities because labor costs scale with the cost of living, and the cost of living in NYC is 75% higher than the national average.
While it’s expensive to outsource labor, it’s still a good idea to hire an HVAC pro in New York City for boiler replacement. An expert will ensure your system is sized and installed properly, and they can help you take advantage of any local incentives for high-efficiency boilers.
Plus, New York City is quite strict when it comes to HVAC work, and it’s illegal to DIY boiler replacement in the city. Only a licensed HVAC tech can pull the necessary permit for the work and sign off on the installation. Speaking of permits, you should budget an additional $130, which is the flat fee the city charges for boiler replacement.
Yes, replacing your boiler will increase home value. The project provides an average return on investment (ROI) of between 60% and 80%. In New York City, that means an average value bump of between $3,200 and $4,400. Your ROI could be higher if you invest in a high-efficiency boiler. In either case, a new boiler with a higher efficiency rating can save you money on heating bills, which will also be attractive to potential buyers.
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
Living in NYC/Manhattan, it’s near impossible to find a plumber who is fair and great to work with. SV Plumbing & Heating were phenomenal and while the project took unknown turns due to the ineptitude of Con Edison, SV Plumbing & Heating were consistent, extremely helpful and trustworthy. I...
It’s been a scorcher out there, with temperatures regularly hitting over 100°. Air Rescue responded immediately to my emergency AC repair request. The technician worked quickly, professionally, and had my home cool again in no time. They saved me from a summer of misery!
Luis and his crew did a quick and professional job installing my in wall air conditioning unit. They gave me a competitive price and took away my old unit. Highly recommended.
Want to say a big thank you to Heating & Cooling Pros. Your hard work and dedication to this project marvelous, sufficient, and most importantly, professional. Extremely wonderful to work with a team as yours. Your knowledge and hard work will make many clients happy as I.
Fleetwell Air Conditioning Heating & Plumbing delivered an outstanding service experience. Their technicians were prompt, courteous, and highly professional, addressing my concerns and explaining everything clearly. They efficiently fixed my AC issues, resulting in lower energy bills. The...
ace Heating and Cooling LLC has become my go-to for all things HVAC. Their professionalism and expertise shine through in every interaction, from scheduling appointments to completing repairs. I wouldn't trust anyone else with my heating and cooling needs.
Do not hesitate to reach out to them; you will surely be as satisfied as I am. Here are the contact details: Website: https://www.wanfer.nyc/ Email: [email protected] Phone: (917) 475-6239 I want to express my high recommendation for Wanfer Solutions LLC. They recently handled the...
I had Super Services install split unit air conditioning (4 units) in NYC apartment recently and their work was superb. Both office and field team are worth mentioning. Veronica, their office manager helped on a mistake in payment that I made (I mistakenly paid twice through AMEX) by promptly...
Kayum and his team are thoroughly professional, polite, knowledgeable, and really care. He did an installation of a big multi-zone heat pump with 4 mini-splits in our house and another install for an external office. He would not be done until everything was perfect. Highest recommendation!
Mr Justin Barnes did an OUTSTANDING job installing a new PTAC/air conditioning and heating unit. Justin first showed up to evaluate my 15 year old unit - and then without any pressure, discussed my repair options, plus my replacement options. He was totally neutral, and I made my own decision...
From average costs to expert advice, get all the answers you need to get your job done.

Find out the average geothermal heating and cooling installation cost in New York, NY. Learn what you can expect to pay for this energy-efficient upgrade.

Find out the average water or fuel tank installation cost in New York, NY. Learn what you can expect to pay for materials and labor to upgrade safely.

The average heat pump cost in New York, New York, depends on the heat pump’s type, efficiency rating, and other factors. Here’s how to budget.

Looking for a qualified boiler installation pro? Learn how to find and hire the right professional, from credentials to questions to ask.

Is your heating system failing or leaking? Learn about radiator and boiler installation costs, warning signs, and how to hire the right local pro.

Discover how much sump pump installation costs in New York, NY, including average prices, cost factors, and tips to save on your basement waterproofing project.