Top-rated deck staining pros.

Get matched with top deck staining pros in Riverton, WY

Enter your zip and get matched with up to 5 pros

Need a pro for your deck staining project in Riverton, WY?

Select your specific project to find the pro for you.

Find Deck staining pros in Riverton

Diamond Custom Design Build
4.0(
5
)
Exterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Riverton, WY and surrounding areas

In business since 2008

Free estimates

Warranties offered

"Dutch and his partner, Mike, put down our hardwood flooring for us in just a few days! Before our floor was laid, they took a wall down in our kitchen which gave us a wonderful open "great room". They were incredible workers. Dutch has so much experience that he was able to figure out some real tough situations we had with wiring and plumbing after the wall was down. Mike was excellent at crawling up in the attic and helping Dutch reroute all the exposed wiring. I've never seen two guys work so hard and put in such long days. They were incredibly fast at their work and I would highly recommend them for any remodeling job. Very nice guys!"
Natural Stone Veneer
Complete Gas Install
Sundeck 5 Tiers
Lodge Frame
Rondeau Project

+14

Recommended by100%of homeowners
Showing 1-10 of 22
Deck Staining questions, answered by experts

Here's the deal with leaving used rags covered in oil-based stain lying around in a pile: Depending on the conditions, these rags can take just an hour or up to a few days to combust. The source of ignition is caused by trapped heat that can be compounded if the rags are near a heat source.

You’ll want to avoid excessively hot or humid conditions, so it’s best to apply your stain in late spring to early fall. It's also important to watch the weather forecast and aim for days when there isn’t rain expected for at least three days. For new decks, allow the wood to season beforehand for at least four to eight weeks.

Stains penetrate wood best when it's cool and dry, so you want to avoid moisture. If the wood is wet upon application, or if it rains before the stain dries, the water will soak into the wood and displace the staining solution. This leads to a flaky and blotchy look, which is the opposite of a sumptuous even coat. Once the stain has fully cured, after about 3 days, rain shouldn’t cause you any problems.

In most cases, sanding an old deck before staining it is necessary to achieve a decent finish. If your old deck has a relatively new stain finish on it and you're only doing touch-ups, you can generally skip the sanding part. However, if your goal is to make the deck look and function better, sanding first is a must. 

Two coats of stain are ideal for the best protection and aesthetic appeal. However, if your decking is made of particularly dense hardwood, you may only need one coat. If you want an intense color, two coats are ideal.

The Riverton, WY homeowners’ guide to deck staining services

From average costs to expert advice, get all the answers you need to get your job done.