Get matched with top ceramic tile pros in Moran, WY

The average cost for tile installation is about $2,000, with a typical price range between $500 and $6,500. On a per-square-foot basis, you can expect to pay between $5 and $45 for installation.

Several factors influence the total cost, including:

• Installation Site: Costs vary for different areas. Common project costs are: kitchen floor ($870–$6,100), countertop or backsplash ($500–$3,000), bathroom floor ($300–$2,400), or shower wall ($225–$2,000).

• Tile Type and Quality: The material significantly impacts price. For example, standard ceramic or travertine tile can cost about $1 per square foot, while luxury options like marble can be as much as $350 per square foot for the material alone.

• Project Size and Complexity: The total square footage, the complexity of the pattern, and the shape of the tile (e.g., square, rectangle, hexagon, mosaic) will affect labor and material costs.

• Site Preparation: The amount of prep work needed, such as removing old tile or installing a new subfloor or backer board, can add to the final price.

• Tile Characteristics: The tile's durability rating and porosity can also influence the price.

• Location: Labor rates vary by geographic location.

Porcelain tiles can last 60 years or longer. With high-quality tiles and proper installation, your porcelain tiles may even outlive you, making them well worth the initial investment.

To help your porcelain tiles last longer, you should clean and maintain them regularly. You don’t need any harsh chemicals to get the job done. Rather, use a cloth, hot water, and mild detergent. And don’t forget to learn how to clean floor tile grout, as that’s just as important as tile maintenance.

When cleaning porcelain tiles, avoid products that contain ammonia, bleach, and other harsh chemicals. Acid-based cleansers can damage the tile, though you can clean them with a diluted mixture of one-quarter cup white vinegar mixed with one gallon of hot water. It is important always to use a soft-bristled brush or sponge, since hard bristles and steel wool can scratch the tile.

If the hearth ends against a wall, you can use a tile cutter as you normally would. However, if the edge of your hearth ends with no surface pressing against it,you may want to look into rounded tiles. These give a smooth edge to your hearth and make sure cut edges aren’t visible. You can also see if the tile you have has pieces that have been glazed or rounded on one edge. You’d then cut the tile and place it normally, with the cut edge facing inward.