Get matched with top sandblasting pros in Lyman, WY

DIY is possible, but professional services ensure even removal, safety compliance, and proper cleanup.

Sanding and pressure washing are both effective ways of maintaining your deck, but one method isn’t necessarily better than the other. Instead, they have different purposes and benefits. Pressure washing cleans dirt and grime off a deck and should be done every year. Sanding removes the old finish and prepares a deck for staining or sealing. This should be done every one to two years.

Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you’ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable—further reducing the cost. The total cost for either will depend on the size of the system.

Sandblasting can be expensive, depending on the scope of your project and the materials involved. Costs can range from $700 to $12,500, but most homeowners spend $3,200 to have a 1,000-square-foot surface sandblasted. Sandblasting services cost $50 to $80 per hour, though most pros charge by surface area at $1.50 to $7 per square foot.