Get matched with top deck maintenance specialists in Webster Springs, WV

Cutting the boards directly is one of the fastest ways to remove deck boards with hidden fasteners. Mark two parallel lines that are one-third of the total measurement on both ends and cut out the centerpiece. Then, remove the end of the board that doesn’t have a fastener. Finally, pry open the fastened side and pull it up to pop out the screw or access the fastener. This also allows you to salvage portions of boards for other projects.

While the terms deck and porch are often used interchangeably, they are two distinct home features. Porches offer a roof that protects from the elements when coming and going from the house. Generally, porches are on the front of your home. On the other hand, decks are generally built in the backyard of a home and offer no roof or protection from the elements, like rain or snow. Porches typically require less maintenance and upkeep thanks to the roof, but both features require regular cleaning and repairs to maintain good condition.

When it comes to rotten deck wood, there really is no fixing it in the traditional sense—it needs to be removed and replaced. While you can certainly do this yourself, we don’t recommend it as some of the issues causing wood to rot could have spread throughout your deck and an untrained eye may not be able to notice. The good news is that replacing deck wood isn’t the most expensive project, and can seriously increase the quality and aesthetics of your home.

Not all porch columns are load-bearing, though they can be. Some porch columns are simply decorative. There are ways to identify a load-bearing column, like looking for visible seams and a foundation. Also, check to see if the column directly enters the ground. In some porch installations, a contractor will excavate a hole to install a column into the earth along with a buried cement base for stability.