Get matched with top mulch and topsoil pros in Rowlesburg, WV

If you decide to DIY your boulder removal project, you’ll want to wear work gloves and protect your eyes if you decide to break the boulder into smaller pieces. Wear a lifting harness and focus on lifting with your legs to prevent back injuries. If you’re digging around a large boulder or using heavy machinery to get underneath it, make sure there are no utility lines nearby.

A 50-pound bag of pea gravel equals approximately one-half of a cubic foot. That amount will cover a three-square-foot area to a depth of about two inches. A three-square-foot area with equal-length sides is approximately 1.73 feet by 1.73 feet, or about 20.75 inches on each side.

Yes, pea gravel is good for driveways as long as your driveway isn’t built on a hill or any type of slope where it can slide. It’ll settle on a flat surface and create a suitable driveway over time, though some spreading initially will take place. If you're wondering how to make a gravel driveway in a high-rainfall area, using pea gravel could help you to cut down on costs needed for extra drainage solutions.

This will depend on the depth of the structure. For a landscape, patio, or walkway that’s around 2 inches deep, a ton of gravel will cover around 100 square feet or about 0.6 cubic yards. However, if you’re building a driveway, which should be a minimum of 12 inches deep, you’d need about 6 tons of gravel to cover the same area.