Get matched with top toilet pros in Ronceverte, WV

Brown stains in your toilet bowl are most likely limescale. Limescale happens from lime being left behind from hard water evaporating. Once dried out, the minerals also catch dirt and bacteria which eventually accumulate into the brown or blackish stain you see in your toilet. To remove thick and hard limescale from your toilet, use a mixture of vinegar, lemon juice, and baking soda, and scrub with a metal scrubbing brush.

The average cost to replace a toilet seal ring is around $50 to $200 if you hire a pro to do the job. If you do it yourself, you’ll only need to pay for the supplies. Wax rings alone cost anywhere from $5 to $25 at hardware stores and can save you a lot of money compared to having a professional installation. At the same time, a licensed plumber knows how to properly install your new wax ring to prevent premature issues down the line.

The cost to install a new toilet typically runs from $225 to $530. This doesn’t include the price of the toilet itself, which can cost $90 to $1,500 depending on the model and features you choose. You can save money if you choose to install a toilet yourself. However, you might want to hire a pro for this project.

"Due to the many complexities of replacing a toilet flange, it is typically a job best left to the pros," says Jeff Botelho, Angi Expert Review Board member and plumber. "Many times it isn't as simple and straightforward as 'pop off the old one and pop on a new one' because the flange is either glued on (PVC/ABS), soldered on (brass/copper), or caulked in place with a lead & oakum joint (cast iron) and none of these things can be easily reversed without years of training and repetitive practice."

If you’ve accessed the bolts and nuts that hold your toilet seat in place and can’t unscrew them, it’s possible that they were overtightened or that the material corroded over time, making it impossible to unscrew. If that’s the case, you can either call in a plumber for help, or you can DIY a solution if you’re careful. Lay down masking tape around the mounting bracket and then use the tape as a surface to lay a hack saw blade. Move slowly to cut through the bracket and bolt, being careful not to damage the porcelain in the process.