Best cabinet makers near Ronceverte, WV

It’s best to stick with lightweight cabinets, such as medium-density fiberboard, if you don’t have a wall stud to secure them to. Unless you’re attaching the cabinet to a flat board attached to wall studs, it’s best not to risk it with heavy cabinetry or contents. Solid wood cabinets and heavy dishware should be avoided if you cannot secure the cabinet to a wall stud. Either way, always check the weight on your wall anchors and be sure not to exceed it.

Medicine cabinets are a convenient storage solution, but they’re not the only option. People often use alternatives like open shelving, recessed wall niches, freestanding cabinets, and mirrored bathroom vanities to replace traditional medicine cabinets. These offer storage space while allowing for a more customized and modern look in the bathroom.

Before making any big plans, climb up a step ladder and closely examine the top of your cabinets. You’ll get to see what sort of clean-up work needs to be done, but you can also check for any unexpected obstacles. Sometimes this space holds electrical boxes, wiring, or even plumbing components. Those will affect plans to install a new layer of cabinets or shelves.

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.