Should wall insulation be faced or unfaced?

• <div><p>Unfaced wall insulation is easier to cut and install, making it the better choice for a DIY project. It’s also more affordable. But if it’s unfaced, you’ll likely need to add a vapor barrier to reach your desired R-value and efficiency, as it doesn’t offer any moisture barrier.</p><p>Faced insulation uses paper or foil to create a built-in barrier and doesn’t require an extra step. It’s also more fire-resistant and safe. But it’s quite a bit more expensive and a little bit harder to work with as a DIYer.</p></div>

Get matched with top insulation pros in Harrisville, WV

Q: How does a radiant barrier work?

• <div><p>In addition to adding insulation to your attic, you may want to add a radiant barrier. <a href="https://www.angi.com/articles/how-does-radiant-barrier-work.htm">A radiant barrier works</a> by using reflective material, such as foil, on the attic floor. As heat penetrates the roof and enters the attic, the radiant barrier reflects the heat upward and back through the roof. If you receive a lot of direct sunlight on the roof, using both a radiant barrier and insulation in your attic can provide significant benefits.</p></div>

Q: Does PEX pipe need to be insulated?

• <div><p>Yes, PEX pipes should be insulated in certain situations. While insulation is not always necessary for pipes running through insulated interior or external walls, it is recommended for any pipes located in uninsulated rooms, unheated areas, or outside, especially in regions with cold winters. The primary reason is to prevent freezing. Although PEX is more resistant to cracking from freezing than other materials, repeated freezing and thawing can weaken the pipes over time, increasing the risk of a burst.</p></div>

Q: Why is fiberglass considered dangerous?

• <div><p>Fiberglass is considered dangerous only if your skin comes into contact with it or if you breathe in any fiberglass particles. This is because fiberglass is literally made of tiny fibers of glass that can cut your skin and your organs. While there aren&rsquo;t many long-term effects, it&rsquo;s still important to take all the proper safety precautions when working with fiberglass.</p></div>

Q: Should I rent or purchase an insulation blower?

• <div><p>Most homeowners installing blown-in insulation as a one-off DIY project should simply rent a blower. They tend to be very heavy, and contractor-grade machines can cost <b>$13,000 to $16,000</b>.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your insulation service project in Harrisville, WV?

Select your specific project to find the pro for you.

Find Insulation pros in Harrisville

Patriot Spray Foam And Coatings, LLC

3.7(

)

Injection Insulation - InstallSpray Foam Insulation - Install

Serving Harrisville, WV and surrounding areas

In business since 2019

Free estimates

Here at Patriot Spray Foam And Coatings, LLC, we pride ourselves on professionalism, attention to detail, and a dedication to our clients wants and needs. We will not leave a project until you are 100 percent satisfied. Feel free to give us a call!

Response time3 days

Recommended by100%of homeowners

Request Quote

American Home Shield – Home Warranty

3.5(

5,688

)

Batt, Rolled or Reflective Insulation - Install or UpgradeBlown-In Insulation - Install or UpgradeInjection Insulation - Install+2 more

Serving Harrisville, WV and surrounding areas

In business since 1971

Credit card accepted

"Roberto was the technician and he was very professional, polite, and personable. He inspected the rest of our system and told us things that needed to be changed or repaired. He showed me pictures of everything. Everything he told me about was accurate. He quoted me a price for R38 insulation , Some of our ducts were plastic and he recommended them to be changed. I agreed completely and didn't know they were plastic. I would have had them done the work but I had no price comparisons to make and besides I didn't have the money right then. So he just finished the vent cleaning and left his card. He did a great job on the vent cleaning and was happy with the work."

Recommended by65%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Batt, Rolled or Reflective Insulation - Install or UpgradeBlown-In Insulation - Install or UpgradeInjection Insulation - Install+2 more

Serving Harrisville, WV and surrounding areas

In business since 1989

Free estimates

Emergency services offered

Our mission at Hampton Enterprise LLC is to provide clients with superior customer service, quality work and speedy service in all aspects of their home improvement needs. Licensed, insured and trusted since 1989; come discover the Hampton difference today!\n\nWe specialize in the installation and repair of Windows, Doors, Flooring, Sinks, Bathtubs, Showers, Sprinkler Systems and much more. We also offer Interior and Exterior Home Painting, Custom Welding Fabrication and Carpentry.Localy in your area just call and i will call back with a local number thank you . from James Hampton\n\nAL.Dothan 334-648-3817,\nAL Birmingham 334-648-3817,\nAL Huntsville 334-648-3817,\nAL Mobile 334-648-3817,\nAL Tuscaloosa 334-648-3817,\nAL Montgomery 334-578-4761,\nAR Little Rock 334-648-3817,\nAZ Phoenix 334-648-3817,\nCA LosAngeles/Sacramento 334-648-3817,\nCO Denver/Colorado Springs 334-648-3817,\nCT Hartford 334-648-3817,\nDE Dover 334-648-3817,\nFL Tallahassee 334-648-3817,\nFL Cape Canaveral/ Cocoa 334-648-3817,\nFL. Destin 334-648-3817,\nFL Gainsville 334-648-3817\nFl Jacksonville 334-648-3817,\nFL Orlando 334-648-3817,\nFL Panama City 334-648-3817,\nFL Tampa 334-648-3817,\nFL Miami 334-648-3817,\nGA Atlanta 334-648-3817,\nGA Albany 334-648-3817,\nGA Augusta 334-648-3817,\nGA Columbus 334-648-3817,\nGA Macon 334-648-3817,\nGA Valdosta 334-648-3817,\nIA Des Moines 334-648-3817,\nID Boise 334-648-3817,\nIL Chicago/Springfield 334-648-3817,\nIN Indianapolis 334-648-3817,\nKS Levenworth/Topeka 334-648-3817,\nKY Frankfort 334-648-3817,\nLA New orleans/Baton Rouge 334-648-3817,\nMA Boston 334-648-3817,\nMD Annapolis 334-648-3817,\nME Augusta 334-648-3817,\nMI Detroit/Lansing 334-648-3817,\nMN Saint Paul 334-648-3817,\nMO kansas City/Jefferson City 334-648-3817,\nMS Jackson 334-648-3817,\nMS Biloxi 334-648-3817,\nMS Gulf Port 334-648-3817,\nMT helena 334-648-3817,\nNC Raleigh 334-648-3817,\nND Bismark 334-648-3817,\nNE Lincoln 334-648-3817, \nNJ Trenton 334-648-3817,\nNM Santa Fe 334-648-3817,\nNV Carson City 334-648-3817,\nNV Las Vegas 334-648-3817\nNY Albany 334-648-3817,\nOH Columbus 334-648-3817,\nOK Oklahoma Ciy 334-648-3817,\nOR Salem 334-648-3817,\nPA harrisburg 334-648-3817,\nRI Providence 334-648-3817,\nSC Columbia 334-648-3817,\nSD Pierre 334-648-3817,\nTN nashville 334-648-3817,\nTX Austin 334-648-3817,\nUT Salt Lake City 334-648-3817,\nVA Richmond 334-648-3817,\nVT montpelier 334-648-3817,\nWI Madison 334-648-3817,\nWV Charleston 334-648-3817,\nWY Cheyenne 334-648-3817

Recommended by60%of homeowners

Request Quote

Insulation questions, answered by experts

Unfaced wall insulation is easier to cut and install, making it the better choice for a DIY project. It’s also more affordable. But if it’s unfaced, you’ll likely need to add a vapor barrier to reach your desired R-value and efficiency, as it doesn’t offer any moisture barrier.

Faced insulation uses paper or foil to create a built-in barrier and doesn’t require an extra step. It’s also more fire-resistant and safe. But it’s quite a bit more expensive and a little bit harder to work with as a DIYer.

In addition to adding insulation to your attic, you may want to add a radiant barrier. A radiant barrier works by using reflective material, such as foil, on the attic floor. As heat penetrates the roof and enters the attic, the radiant barrier reflects the heat upward and back through the roof. If you receive a lot of direct sunlight on the roof, using both a radiant barrier and insulation in your attic can provide significant benefits.

Yes, PEX pipes should be insulated in certain situations. While insulation is not always necessary for pipes running through insulated interior or external walls, it is recommended for any pipes located in uninsulated rooms, unheated areas, or outside, especially in regions with cold winters. The primary reason is to prevent freezing. Although PEX is more resistant to cracking from freezing than other materials, repeated freezing and thawing can weaken the pipes over time, increasing the risk of a burst.

Fiberglass is considered dangerous only if your skin comes into contact with it or if you breathe in any fiberglass particles. This is because fiberglass is literally made of tiny fibers of glass that can cut your skin and your organs. While there aren’t many long-term effects, it’s still important to take all the proper safety precautions when working with fiberglass.

Most homeowners installing blown-in insulation as a one-off DIY project should simply rent a blower. They tend to be very heavy, and contractor-grade machines can cost $13,000 to $16,000.

The Harrisville, WV homeowners’ guide to insulation services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Deane Biermeier
•
Jul 8, 2026Jul 8, 2026
How Much Does Ceiling Insulation Cost? [2026 Data]
Your home's ceiling insulation cost will depend on several factors, including the project size, the type of insulation you use, and the R-value.
Mitchell Grant
•
Jul 9, 2026Jul 9, 2026
How Much Does Crawl Space Insulation Cost? [2026 Data]
Crawl space insulation costs vary by size, insulation type, and material. Read this guide to learn how much your crawl space insulation could cost.
Dan Simms
•
Mar 6, 2026Mar 6, 2026
How Much Does Pipe Insulation Cost? [2026 Data]
Find out the average pipe insulation cost, including material and labor prices, plus tips to save money on your project.
Scott Dylan Westerlund
•
Jul 9, 2026Jul 9, 2026
What Is Dryer Vent Insulation? Should You Insulate It?
Learn how to decide if your home needs dryer vent insulation to protect your vent from drafts and moisture that can make your energy usage less efficient. Poorly ventilated dryer vents also increase mold risks!
Allie Ogletree
•
Jul 31, 2026Jul 31, 2026
Should You Remove Old Insulation Before Adding New Insulation?
Removing old insulation may be necessary for upgrading your insulation. Keep reading to see if you should remove old insulation before adding new insulation.
Deane Biermeier
•
May 2, 2026May 2, 2026
How to Insulate Plaster Walls in a Home
Learning how to insulate plaster walls can help improve your home's energy efficiency. However, there are crucial cautions to consider before attempting.