Get matched with top furniture refinishers in Dellslow, WV

Wood can appear blotchy after staining due to uneven absorption, which happens when the wood has varying grain density. The denser the grain, the less the stain will be absorbed. This can cause the wood to appear uneven in color, with some areas darker than others. 

To prevent this issue, apply a wood conditioner before staining. Wood conditioners help to equalize the absorption of the stain, resulting in a more even finish. There are many different types of wood conditioners available, so be sure to choose one that is appropriate for the type of wood you are staining.

Regularly check and tighten bolts, avoid overloading, and inspect for wear.

A cloudy film on top of a wooden surface usually means either the incorrect cleaner was used or there is polish buildup. You’ll need to start over again and remove the surface cleaner with a damp rag and some water and dish soap. Be careful not to leave the wood surface wet as this could cause water damage.

Black stains appear on wood furniture when the surface comes in contact with water and metal for an extended time. It creates a chemical reaction that stains your wood black. Products that contain oxalic acid can remove these stains. Its bleach-like qualities can reverse the stains after a few rounds of application.