Get matched with top countertop and backsplash pros in Beverly, WV

Deciding between marble and granite for kitchen countertops depends on your personal priorities, budget, and style. Both materials have similar costs for material and installation.

Marble offers a luxurious aesthetic and timeless beauty, but it is more expensive and requires more maintenance. It is susceptible to staining and etching from acidic substances like coffee, wine, or tomato sauce if spills are not cleaned up quickly.

Granite is highly durable, heat-resistant, and easier to maintain, making it a practical choice for busy kitchens.

Both materials should be sealed to protect against damage, but they can still be vulnerable to stains if spills are left on the surface for too long.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.

Unfortunately, you cannot put hot pans directly on laminate countertops, as the heat can cause significant damage. The heat can cause chips, burns, and marks, plus weaken the laminate. If you do have something hot you need to set down, then be sure you use a trivet or towel as a barrier between the countertop and pan so you can prolong its life.