Best grout and tile cleaning pros near Phillips, WI

Before you begin caulking a shower, you’ll need to use a utility knife or solvent to remove the old caulk and inspect the area for mold. If needed, take appropriate steps to get rid of the mold, then wipe everything down with dish soap and warm water before letting it dry completely. Finally, surround the caulking area with two strips of blue painter’s tape—one above the joint where you’re caulking and another below it.

You can clean your bathroom like a professional by keeping your cleaning tools and products organized and having a cleaning plan or routine. Most cleaning pros start by dusting and sweeping first and applying cleaning solutions. You should let the solutions sit in your bathtub, shower, sink, and toilet, and wipe everything down with fresh cleaning cloths. A final mop gives the finishing touch.

Preventative measures can help you keep your white grout clean and bright. When you’re cleaning grout, make sure all your tools are clean, too. Don’t use a dirty brush, dirty sponge, or dirty water. Some minerals in water can also cause yellowing of grout, so test your water to see what’s in it and invest in a water filtration system, if needed.

You want the bonding process to get started but not finish before wiping away newly applied grout. That process takes about 15 to 30 minutes. Use a wet cloth or sponge to remove the grout, but keep in mind that it will continue to dry and cure. Drying and curing times vary by the type of grout, so read through the instructions to know when it’s safe to walk on or use the room in which you tiled.