Get matched with top fire pit installation pros in Maribel, WI

If you plan to put a fire pit on a grassy area, be sure to put compacted paver sand down first to help level out the ground and add better heat protection. If you’re placing a fire pit on hardscaping, like a concrete patio, consider placing a fire pit mat down first. This can add more protection from the heat and also protect the look of your hardscaping if you choose to remove the fire pit in the future.

Shiplap can be safe for a gas fireplace, but you should consult with a fireplace installation pro before proceeding. You need to make sure your project meets building and safety codes since shiplap is made from flammable wood. You may need to install another non-combustible material, like stone or brick, around the fireplace for a certain amount of space before you can add shiplap.

If a light switch is off, it’s very unlikely to cause a fire. For a fire to start, the switch has to be on, activating an electrical current, and the wiring must be faulty. However, the malfunctioning light switch could cause an intermittent current to move across the electrical wire. This issue could become a fire hazard with another device connected to the wire. You should replace the bad light switch as soon as you notice it or call an electrician.

A smoke alarm that beeps periodically, often every 30 to 60 seconds, usually indicates a low battery. The first step is to replace the battery. If this doesn't solve the problem, try resetting the alarm. However, beeping can also signal other issues, such as dust buildup in the sensors or the unit reaching the end of its life. Different beep patterns can mean different things; for example, multiple beeps might indicate an issue with a combination carbon monoxide detector, while a continuous, loud alarm means smoke has been detected. If a new battery doesn't stop the beeping, it's best to consult your alarm's manual, call a professional, or replace the unit.