Best sump pump installation pros near Kohler, WI

A sewage ejector pump is necessary if you have any plumbing fixtures, such as a bathroom, laundry room, or sink, located below the level of your home's main sewer line. Standard plumbing relies on gravity to move wastewater and solid waste to the municipal sewer or septic tank. However, for fixtures located below grade (e.g., in a basement), gravity is not sufficient.

The purpose of a sewage ejector pump is to actively pump this wastewater and solid waste upward into the main sewer line. Without an ejector pump in this situation, wastewater would have no way to exit and would eventually back up, causing a sewage overflow or flooding in your basement. If all of your home's plumbing is on the main floor or higher, gravity can handle the drainage, and an ejector pump is not needed.

If you notice any new sump pump noises, such as persistent clanging or gurgling, then you likely have a sump pump problem on your hands. Foul odors coming from the pump can also indicate problems. Additionally, if your unit turns on but doesn't pump water, you might have to address electrical problems. In any of these cases, it's a good idea to hire a professional to address the issue.

If you’re wondering if your home even needs a sump pump, consider whether you’ve struggled with flooding issues in the past. If your house is in a flood-prone area, your yard has poor drainage, or you’ve dealt with any other water problems, then it’s likely well worth it to replace your old sump pump with a new one.

To test for toilet leaks, use water coloring in the water tank and see if the water slips into the bowl from the tank. This test will indicate if there’s a problem with the flapper or refill tube. You can also put water coloring in the bowl of the toilet to see if there is a leak there. If there is, you should see the colored water on the outside of the toilet bowl or on the floor.